Electrical Engineering Tutors & Teachers for Lessons, Instruction or Help in Thompsons, TX

25 years in the optical engineering field. Lasers, fiber optics, optics, electro-optics, LEDs and other experience. Have developed optical systems for smart weapons, fiber optic sensors, laser systems, bio-medical applications, telecommunication devices and industrial automation. I have a BS and MS in Optical Engineering.

$ 42.50

average per hour

($35.00-$50.00)

Range

I have lectured students of ordinary diploma in electrical engineering in the subjects of electrical engineering science, electronics and engineering maths. Ihave aldo taught higher diploma in electrical engineering In the subjects of satelite systems and eletronics. I have taught computer packages - microsoft applications MS Word, MS Excel, MS Access, MS Power point and I use these applications for my daily work.

$ 37.50

average per hour

($30.00-$45.00)

Range

1.Power Engineering (Substation design , Protection and control system design) 2.Circuitry 3.Telle Communication Power,Circuitry,Telecom engineering. Dynamic system design,software development,equipment technical specification,design,construction,commissioning, calculations, relay coordination, load flow and short circuit studies, protection relay settings and microprocessor type relay programming, as well as in RTU and IEC 61850 based control/SCADA/PLC/HMI system installation, programming, configuration and trouble shooting. Detailed experience in writing work scope, work schedule, design specifications & equipment selection for the design, AC & DC system design, one-line & three-line protection/control schematic diagrams, panel arrangements, wiring diagrams, cable & connection scheduling and cable listing. Expertise in control system integration, communication network design, P

$ 37.50

average per hour

($35.00-$40.00)

Range

I teach my students in charismatic way.No stress at all. I am professional registered Control Systems Engineer here in Texas and practicing in the Oil & Gas industries for many years. I have a two bachelors degree one in Mathematics and the other in Instrumentation & Electronics engineering. I have done my masters in Electrical engineering and also have MBA dgree. I have a passion teaching high/middle/elementary students especially in the Science and Math area and enjoy when I see thier confidence in the subject matter. I am also a mentor in Science project;I helped many students who won many awards in the Science compititiopn. I am also involved in writing technical papers, and also in the research.

$ 40.00

average per hour

($30.00-$50.00)

Range

Mathematics: Algebra 1; Algebra 2- Geometry- Calculus 1; calculus 2 - Trigonometry - Pre-algebra - Pre-calculus teaching Electrical Basics; Electronics Basics; Electronic Laboratory; electrical Laboratory and electronics teaching- Electron Ballistics- Energy levels- Troubleshooting Skills; single phase and three phase circuits

$ 35.00

average per hour

($30.00-$40.00)

Range

Expert at electrical design for oil and chemical industry to include motor controls, lighting, grounding, MCC design, voltage drop calculation, cable sizing, power conversion from 13.5 kv - 120 vac. Efficient with acad. Note: Extensive use of available internet calculators I have 40+ years experience as an electrical engineer, manufacturing engineer, instrument engineer, instrument designer and electrical designer. prior to my retirement I worked for major companies like Siemens, Reliance Electric, Allen-Bradley, Jacobs Engineering, Parsons, Dow Chemical, Shell Chevron to mention a few. Want to know the basics of design? I can help.

$ 30.00

average per hour

($25.00-$35.00)

Range

I am actively working in computer industry from last 30 years. I studied several mathematics courses during my Bachelors, Masters and Doctoral studies. My Electrical engineering elective is power electronics. I have extensive power engineering and power electronics experience in industry. Have several patents issues.

$ 65.00

average per hour

($30.00-$100.00)

Range

Tech Professional-Electrical/Electronics, Intelligent Completions Feb. 2014-Present Halliburton, Spring, TX • Develop, test and debug firmware for Microprocessor/Micro-controller/DSP system • Diagnose instruments and electrical and/or electronic systems problems. Services, troubleshoots, repairs and/or replaces and maintains instrument and electrical and/or electronics component levels in surface and downhole equipment. • Design of analog and digital circuits with focus on high temperature environments. • Performing reliability and qualification test for parts in circuit. (This resulted a significant raise of yield of downhole gauges.)

$ 42.50

average per hour

($35.00-$50.00)

Range

I have 40 years experience in Electrical and Control Automation Design Programming and Commissioning Extensive Experience in Food Beverage Building Material Steel And Oil and Gas Drilling engineering. Exgensive Expereinec training And mentoring Junior mebers of Companies I have been associated with.

$ 36.50

average per hour

($34.00-$39.00)

Range

I have both a bachelors and masters degree in electrical engineering from Drexel University Math, Science, and Engineering Tutor June 2008-Present I tutored students in all levels of secondary mathematics from Algebra 1 through AP Calculus, Physics, and AP Physics. Regional Coordinator, National Action Council for Minorities in Engineering June 2002-June 2005 I developed scholarship programs and curriculum that resulted in millions of dollars in full scholarships for hundreds of students. Math and Science Teacher, The Rubicon Academy September 2002-June 2005 I taught mathematics, science, and robotics to middle school students. Engineering, Math, Physics, Space Science, Robotics, and CS Teacher September 1975-June 2002 I taught a multitude of subjects and projects including having students participating in robotics contests with Rice University students, launching experiments a

$ 37.50

average per hour

($35.00-$40.00)

Range

I love teaching and working with all children. I believe all children can learn, but each in different ways. I am available to help your child find academic success. I am patient, easy going, and considerate. My goal is to provide the best education possible. I am a firm believer in teaching through discovery and in providing a constructivist approach to learning. I believe all children can meet their potential if given the appropriate surroundings and learning experiences. I strive to make a difference in all of my students' lives. As a graduate of one of the best Universities in Africa (Unilorin,Nigeria), I was much driven to achieve a high level of excellence in education. I have earned two master degrees, M.Sc in Physics and MBA (Marketing Management), which has enabled me to gain an understanding in many areas of Mathematics, Science and Management. In addition, I have learned exten

$ 40.00

average per hour

($43.00-$51.00)

Range

When I was in college I served as private tutor for a fourth grader for two years. His grades dramatically improved while we were working together. I enjoy working with others and find it rewarding to help others master difficult concepts. My teaching style will vary to incorporate the learning style of the student. All people learn a little differently so I will try to find out what works best for that student i.e. working problems, having discussions, reading together, etc.

$ 43.00

average per hour

($44.00-$56.00)

Range

I pursued and received an Electrical Engineering degree to attain a career in the high technology field of semiconductor chip product developemnt in 1978. After a 25 year career with Texas Instruments, I chose to continue my love for math and science by attaining a TEA certificate for high school mathematics. I am currently a highly qualified AP Calculus, AP Physics, Pre-calculus and Engineering Math instructor at Hargrave High School, Huffman, TX. I have formally and informally tutored students over the last 5 years and find no greater joy than when a frustrated student finally "gets it!" Although I feel lecture, guided instruction and practice are a very important part of teaching mathemeatics, it is usually not enough as abstract ideas have difficulting finding relavence with most students. I rely heavily on my past experiences in my engineering career to draw real world examples t

$ 38.00

average per hour

($41.00-$49.00)

Range