Jose Angel S.

• White Plains, NY 10601 ( 5.6 mi )
• Experienced Engineering Tutor

• Male Age 66
• Member since: 04/2017
• Will travel up to 20 miles
• Rates from $30 to $100 /hr
• On-line
• Also Tutors: Environmental Engineering, Mechanical Engineering, Chemical Engineering, Bio-Medical Engineering

Contact this Tutor View Full Profile

Engineering is one of my top subjects! As Chemical Engineer I can approach several engineering problems. I am not pretending to be a general expert but being experienced Chemical Engineer I know that this kind of interdisciplinary problems are frequent. I have some consulting experience so I can help in Process Design Projects

Understand the basic phenomena is the best way to process engineering success
I am Chemical Engineer since 1983 and have been Lecturer at the Universidad Central de Venezuela for more than 30 years. I got my PhD at the Karlsruhe university (today Karlsruhe Institute of Technology). My teaching experience is mainly in Thermodynamics and Transport Phenomena, teaching among others Chemical Engineering Principles, Fluid Mechanics, Heat Transfer, Separation Processes, Solid-Liquid Separations, Particle Technology. I have also some industrial experience in the alumina industry where have been process engineer during the plant expansion from 1.3 to 2.0 MMTPY at the end of the 80's. My research field is Fluid-Particle Systems in particular Solid-Liquid Separation, but also processes where particle size distribution affects the performance

Robert R.

• New York, NY 10034 ( 7.3 mi )
• Engineering Tutor

• Male Age 57
• Member Since: 03/2018
• Will travel up to 50 miles
• Rates from $10.00 to $15.00 /hr
• I am a Certified Teacher
• Also Tutors: Industrial Engineering, Electrical Engineering

Contact This Tutor View Full Profile

A Little Bit About Me...

I worked for 15 years as an engineer in electronics and telecommunication in Atlanta, Georgia and 15 years as a teacher at Bard Early College (BHSEC Manhattan, 525 East Houston Street, New York, New York 10002). I am very competent, have rich knowledge in mathematics (arithmetic, algebra, plane geometry, spatial geometry, calculus, trigonometry etc.), I have a good pedagogical spirit and patience with my student and using the best methods in order to help the student to understand any matter of mathematics. I am cheerful, with much sense of humor, friendly, kind, fair.

shayan b.

• Englewood, NJ 07631 ( 7.8 mi )
• Engineering Tutor

• Male
• Member Since: 04/2015
• Will travel up to 20 miles
• Rates from $35.00 to $50.00 /hr
• On-line In-Home
• Also Tutors: Electrical Engineering

Contact This Tutor View Full Profile

Read More About shayan b...

-Virginia Tech, 2009-2015 •Teaching and Lab assistant of power system analysis, electrical drives and other courses •Project adviser, Distribution System Protection project with Otter Tail Power Company, MN •Writing the book "Electrical Machines and Drives Using dSPACE"- to be published by Virginia Tech, 2015.
Teaching Philosophy I am a very good teacher by nature and have excellent track record in my previous classes where students were always learning and passed the test with high scores. I have frequently heard from my students that they have learnt in my class way more than their entire studying period in the university. I always make sure that I dedicate enough time to teaching the context of each concept first so that students know exactly where and how they should expect to see application of the knowledge they have obtained. There was a class project with Otter Tail P ... read more

Saran E.

• New York, NY 10001 ( 15.6 mi )
• Engineering Tutor

• Male
• Member Since: 01/2015
• Will travel up to 50 miles
• Rates from $50.00 to $250.00 /hr
• On-line In-Home In-Group
• Also Tutors: Environmental Engineering, Mechanical Engineering, Materials Engineering, Industrial Engineering, Bio-Medical Engineering

Contact This Tutor View Full Profile

Individualized Tutoring for Variety of Subjects + Job Skills

Subjects include the following: * Math (up to advanced coursework) * Statistics (up to advanced coursework) * Economics (up to advanced coursework) * Finance/Markets (up to advanced coursework) * Computer Science, including Programming/Languages (introductory to intermediate courses) * Financial Accounting and Managerial Accounting (introductory courses) * Physics, Biology, Systems Engineering, and other science/ engineering subjects (introductory to intermediate courses) * ACT, SAT (1), PSAT, SAT II subject tests, ‘STEM’ subjects competition-type tests, AP exams, IB exams, GCE A Levels; LSAT, GRE, GMAT, GRE II subject tests; MCAT, DAT, OAT, PCAT, ATI TEAS, NCLEX, USMLE/ COMLEX (standardized test preparation) Q. What do you like most about your job? A. I absolutely enjoy assisting people reach mastery of subjects they found difficulty with. I find satisfaction in ... read more

H G.

• Forest Hills, NY 11375 ( 16.1 mi )
• Engineering Tutor

• Male
• Member Since: 12/2013
• Will travel up to 20 miles
• Rates from $25.00 to $35.00 /hr

Contact This Tutor View Full Profile

A Little Bit About Me...

I tutored students ranging from grade three to college freshmen in mathematics. I also occasionally tutor in subjects such as chemistry, physics and foreign languages. I teach studying methods and concepts/ideas to enable the students to move forward and master material rather than just teach by examples.

GKM J.

• Brooklyn, NY 11207 ( 19.2 mi )
• Engineering Tutor

• Male
• Member Since: 12/2015
• Will travel up to 20 miles
• Rates from $30.00 to $35.00 /hr
• On-line In-Home In-Group
• Also Tutors: Mechanical Engineering, Materials Engineering, Industrial Engineering, Electrical Engineering

Contact This Tutor View Full Profile

Mechanical Engineering Specialist

Vast experienced in various electro-mechanical fields, Major of them are – Electro-Mechanical Engineering Specialist under DWASA (ADB TA8053- BAN), Mechanical Engineering Specialist under KWASA: ADB Loan 2756- BAN(SF), Consultant- Power Generation, 78.5 MW Quick Rental Power Plant with GE Energy (USA) at Ghorashal, Sr. Mechanical Engineer, Fenchugonj 50MW Peaking Power Plant, Deputy Team Leader/Mechanical Engineer, 2x150MW Khulna/ Sirajganj Peaking Power Plant Construction Project (Loan: ADB 2332- BAN), Mechanical Engineer, Installation, Settings, Commission of 27 nos. Caterpillar Gas Generators (Model: CAT: G3520E), Mechanical Engineer, Electricity Generation Company of Bangladesh Bangladesh (EGCB: IDA Credit), Training Specialist, Rural Water Supply Programme Project under DPHE (IDA Credit # 3124-BD), Operations Manager/ Senior Mechanical Engineer, National Minor Irrigation Developmen ... read more

Guy L.

• Norwalk, CT 06851 ( 23.9 mi )
• Engineering Tutor

• Male
• Member Since: 11/2011
• Will travel up to 20 miles
• Rates from $40.00 to $48.00 /hr
• On-line In-Group

Contact This Tutor View Full Profile

I have extensive experience in the architectural field (Cad)

I have accumulated extensive experience in the architectural field while working as a project manager and a consultant in the commercial, residential and industrial construction document management. I also posses the ability to create commercial and residential construction documents and I have a vast amount of experience in field surveying and managing contractors along with facility personnel which should benefit all students.

Alhussin I.

• Staten Island, NY 10305 ( 25.6 mi )
• Expert Engineering Tutor

• Male Age 30
• Member Since: 02/2015
• Will travel up to 20 miles
• Rates from $30.00 to $39.00 /hr
• On-line In-Home In-Group
• Also Tutors: Electrical Engineering

Contact This Tutor View Full Profile

Math tutor for all levels

I have been tutoring since 2012 I have learned a lot from other professional tutors and teachers. I worked at the college I`m currently enrolled in, as a math tutor. I tutored from Algebra to Precalculus to high-level calculus and even higher-level math courses.I also tutored in Math and chess for about a year after wards. I was working with students who needed help with SAT prep and high school Algebra. I then started tutoring at Caddell Prep, where I continued to teach SAT material and furthermore highschool math. I have experience with all different kinds of students and I enjoy what I do. I taught all different types of math course as well I understand what it takes to be successful in this subject.
I tend to like learning about the person I`m tutor, to help give me a prospective of his/her thinking. I also like to challenge my students and push them to be better each and every ... read more

Magdy H.

• Short Hills, Cartert NJ, NJ 07078 ( 26.6 mi )
• Engineering Tutor

• Male Age 65
• Member Since: 10/2011
• Will travel up to 30 miles
• Rates from $60.00 to $100.00 /hr
• I am a Certified Teacher
• On-line In-Home In-Group
• Also Tutors: Environmental Engineering, Mechanical Engineering, Materials Engineering, Industrial Engineering, Electrical Engineering, Civil Engineering, Chemical Engineering, Bio-Medical Engineering, Aerospace Engineering

Contact This Tutor View Full Profile

My comments on tutoring Engineering : 30 Years teaching and tutoring

No student left behind
I have experience more than 20 years teaching all levels of math and physics for high schools and college.I have BA in mechanical engineering and MS in mathematics.My research was application of calculus to physics. Tutoring All math for 6 - 12, College, SAT, HSPA, ACT, MCAT(math, Physics), GRE(Math), GED, Chemistry, Engineering, I love working with the students, I have to find my own way to help the students to understand the course. Essex County College, NJCU Physics, math. New Jersey City University, Jersey City, NJ Newark Public Schools NJ. Private tutor.

Hemal B.

• Edison, NJ 08820 ( 33.8 mi )
• Engineering Tutor

• Male Age 37
• Member Since: 04/2015
• Will travel up to 20 miles
• Rates from $18.00 to $35.00 /hr
• On-line In-Home In-Group
• Also Tutors: Mechanical Engineering

Contact This Tutor View Full Profile

Mechanical Teacher

Simple way with own trick with easy homework.
I have 5 years experience of teaching mechanical diploma and graduate student for all mechanical subjects. Current company Subh solution Design and project engineer 02/02/2015 till Now San diego CA 92126 (Training) Previous Ntech FEA Service Sr. Design and Project engineer 04/21/2014 to 11/30/2014 Maninagar, Ahemedabad - 380008 Job Profile ? Generate 2D and 3D model drawing in CAD software as per requirement. ? Provide detailed drawing with GD&T with company standards. ? Modification of existing product drawing based on customer requirements. ? Preparation of calculation templates, detailed drawing and bill of material. ? Concept design and analysis of parts, assembly and mechanism. ? Design and Optimization of product using CAD and Analysis Software. ? Cost estimation of product from design en ... read more