Jerry M.

• Long Beach, CA 90805 ( 12.2 mi )
• CAD Tutor

• Male
• Member since: 06/2015
• Will travel up to 50 miles
• Rates from $30 to $40 /hr
• On-line In-Home In-Group
• Also Tutors: CAD

Contact this Tutor View Full Profile

If

Results-oriented, hands-on professional with 19 years of drafting experience. Verifiable track record for the completion of multi-million dollar projects through coordinating trades, developing partnerships, and building positive rapport with architects, engineers, local officials, vendors, and clients while maintaining costs. Versed in as-built surveying, contract negotiations, project estimating, impending design problems, document preparation, material purchasing and construction management.
My teaching style depends on the student. The student's goals and timeframe will dictate my strategy to accomplish the student's objectives.

Iulian M.

• Los Angeles, CA 90001 ( 18.6 mi )
• CAD Tutor

• Male Age 31
• Member Since: 01/2017
• Will travel up to 20 miles
• Rates from $15.00 to $20.00 /hr
• On-line
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

6 years of experience of using CAD software

I have an experience of about 6 years in using Sketchup and other CAD softwear. I am mainly specialized in using CAD for architectural design, but I also used if for product design as also. I am very familiarized with the extensions that Sketchup uses. I published several paper which concern the use of CAD technology for preserving architectural heritage.
I use a very interactive teaching style based on the student's needs, I am very flexible and usually use a wide range of techniques for getting the best results.

jay j.

• Tarzana, CA 91356 ( 36.5 mi )
• CAD Tutor

• Male
• Member Since: 08/2017
• Will travel up to 30 miles
• Rates from $25.00 to $50.00 /hr
• I am a Certified Teacher
• In-Home In-Group

Contact This Tutor View Full Profile

Computer | Internet | Design

Hands-on, quick and precise. I only teach the things a student need in the software - features they don't need are only covered if requested and are mentioned anyway. My goal is to get you up and running with Autocad as soon as possible so you can work and learn on your own - That's how I personally learned!
I have trained many students, engineers and designers to use the software efficiently for personal, educational & professional projects. I also worked for a construction company that did stone work for high-end residential projects, an interior designer, a general contractor, an architect and a manufacturer.

Jerome M.

• Costa Mesa, CA 92626 ( 6.4 mi )
• Expert CAD Tutor

• Male Age 66
• Member Since: 11/2011
• Will travel up to 20 miles
• Rates from $30.00 to $50.00 /hr
• On-line
• Also Tutors: HTML, Microsoft Excel

Contact This Tutor View Full Profile

My comments on tutoring CAD : AutoCad and MicroStation 2D

Eighteen years of Cadd drafting experience to lend my expertise to students looking to grow. I'm versatility in the drafting of mechanical, HVAC, electrical, architectural, civil, and structural design utilizing 2D Microstation and AutoCad software's. Able to work online and take individual steps with you. Can also give HTML and VB steps.
Online

Brian E.

• Anaheim, CA 92807 ( 8.4 mi )
• Experienced CAD Tutor

• Male
• Member Since: 03/2012
• Will travel up to 20 miles
• Rates from $25.00 to $50.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

My comments on tutoring CAD : AutoCAD, Civil,

Open Mentor
20 plus years experience in CAD Land Surveying Data to CAD Civil Engineering-Maps (Base Maps, Topo, Construction, Grading, Contours, Sub-Divisions, ALTA, Landscaping) Architectural and Landscape Plans Shop Drawings P&ID Learn how to read Blueprints and create CAD drawings from scratch! How to organize files and keep layers clean....

Rod P.

• Newport Beach, CA 92660 ( 9.3 mi )
• CAD Tutor

• Male
• Member Since: 11/2011
• Will travel up to 20 miles
• Tutoring Rate: $40.00 /hr
• I am a Certified Teacher
• On-line In-Home

Contact This Tutor View Full Profile

A Little Bit About Me...

I have been able to teach AutoCAD to the basic beginner up to the 20 year veteran.
20 years CAD experience. Familiar with AutoCAD, Drafix, VersaCAD, Solidworks, Revit, Cadkey and Sketchup. I have experience in architectural, mechanical and electrical design. 20 years ago I started off doing CAD/CAM and have learned every style since. I've taught other employees at nearly every company I've been employed at.

BENNY D.

• Carson, CA 90746 ( 15.7 mi )
• CAD Tutor

• Male
• Member Since: 11/2011
• Will travel up to 40 miles
• Rates from $30.00 to $50.00 /hr

Contact This Tutor View Full Profile

Read More About BENNY D...

I can tailor the subject matter to suit the students' needs, considering what he or she already knew. My approach in tutoring is different to my approach in classroom teaching. In tutoring the TUTEE is always in front of the computer so he or she can apply what I am saying or teaching. In short words it is more hands on since this is COMPUTER-AIDED subject.
I retired from an aerospace company in the area and also just retired from USN Reserve. I was a part time AutoCAD instructor for a couple Vocational Institutes or Colleges. I served under Special Projects, trained Engineers, Architects, Draftspersons, Interior Designers and other professionals in the design trade in the use of CAD Software. I prepared the syllabus and exercises. Researched solutions to problems that were beneficial to the students/trainees. Maintained proficiency with software used. I was an Adjunct Instr ... read more

Kyle C.

• San Pedro, CA 90731 ( 16.1 mi )
• CAD Tutor

• Male
• Member Since: 05/2012
• Will travel up to 30 miles
• Rates from $25.00 to $35.00 /hr

Contact This Tutor View Full Profile

More About This Tutor...

I have been using AutoCAD for over 15 years starting from Relase 14.1 up to AutoCAD2012. I have a background in Landscape Architecture and have thought AutoCAD at ITT Tech in Rancho Cardova, CA. I'm very patient and can adapt to any style of teaching from the basics to advance. However I don't tutor on 3D.

Insiyya M.

• Torrance, CA 90503 ( 19.9 mi )
• CAD Tutor

• Female
• Member Since: 05/2012
• Will travel up to 30 miles
• Rates from $30.00 to $50.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

A Little Bit About Me...

Have a background in interior design ,autocad and 3ds max .Before i became a tutor i have gained immense knowledge as a designer and worked on many projects on autocad .Worked as an Auticad tutor at college of the canyons for 2 years+ , where i helped teaching and tutoring high school kids and design kids Autocad .Have the necessary software and sheets to teach patiently and be thorough with the basics .

Gianna G.

• Montclair, CA 91763 ( 20.8 mi )
• CAD Tutor

• Female
• Member Since: 01/2016
• Will travel up to 20 miles
• Rates from $15.00 to $30.00 /hr
• I am a Certified Teacher
• On-line In-Home In-Group
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

Read More About Gianna G...

I finished my masteral degree on special education and education units from De La Salle University, Manila and have been teaching for the past eight years at Xavier School Greenhills. Four years in preparatory school then/and currently with the English Department teaching fifth graders. As a teacher I am committed to the development of effective ways to teach reading and writing to children with or without special needs. For the past three school years I have been asked to train grade school teachers on the Zaner-Bloser penmanship style. Outside school, I had conducted research and created an individualized penmanship program for students with ADHD. I was also a breakout speaker for Frontiers and Innovations in Teaching in 2014 where I discussed about exploring sites and various applications to empower students in Digital Storytelling. The next year, 2015, I was also invited to be a s ... read more

Roger F.

• Dana Point, CA 92629 ( 21.5 mi )
• CAD Tutor

• Male
• Member Since: 01/2012
• Will travel up to 20 miles
• Rates from $30.00 to $40.00 /hr
• In-Home In-Group
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

Solidworks Tutor/Freelance Product Designer/Rapid Modeler

I regularly consult with and train industry leading companies employees for Honda, Addidas, Nokia, John Deere, and Medtronics to name a few on how to better build their prototype models for their unique product applications. I am comfortable teaching one student or a class. I am happy to work as a consultant or a contractor on creating any geometric shape required,
Currenntly I am a 3D Modeling/Prototyping Consultant with the leading manufacturer of additive manufacting hardware. 5 years experience I specialize in product design using Solidworks, 3D CAD Software. I am an expert in the use of the ProJet Line of 3D modeling systems. I have a strong basic knowledge of STL file fixing software and a working knowledge of various prototype model building techniques for industry. I also understand many manufacturing processes and their procedure requirements.

Frank H.

• Los Angeles, CA 90015 ( 21.9 mi )
• CAD Tutor

• Male Age 50
• Member Since: 07/2013
• Will travel up to 20 miles
• Rates from $20.00 to $39.00 /hr
• On-line In-Home In-Group
• Also Tutors: Computer, Graphic Design, Desktop Publishing

Contact This Tutor View Full Profile

Learn what you like love what you do.

i show you what you need to know as you work on your laptop or desktop.
i have worked in both fields for many years. in drafting i in almost every type of engineering there is, Three of which in HVAC Drafting and Jr Design. as a Graphic Designer i also have a wide verity of experience from screen printing set up i also have experience in printing set up and digital set up as in for web use.

Johnny A.

• Inglewood, CA 90302 ( 22.9 mi )
• Expert CAD Tutor

• Male Age 67
• Member Since: 04/2012
• Will travel up to 20 miles
• Rates from $35.00 to $50.00 /hr
• In-Home In-Group

Contact This Tutor View Full Profile

CAD is one of my top subjects! I have more than 20 years as an Architectural Designer with a BA Architecture. And CAD was one of many tools I used to design and put construction documents together. I can teach CAD 12 to any early version. Therefore, I consider myself an expert.

I have more than 20 years as an Architectural Designer. I have 2 years of community college in Architectural drawings/construction documents (AA Degree- Graduated)from LA Trade-Tech College. Also I have BA as an Architectural Designer from Woodbury University. I 2 years experience as Teacher's Assistant in structures (Concrete and Steel), moreover I was private tutor at Woodbury University. I had work as tutor for "BEST" company that tutor students from 1st grade to 12th grade, I spent 2 years, teaching Algebra, Geometry, Trigonometry. I have 3 years of Civil Engineer.
I had work on one to one basis as well as small groups of 5 students up to 10. I like to meet with them at libraries or specific place as mutual agreement with the student with not distraction of any kind.

Mathew Samuelle N.

• Los Angeles, CA 90008 ( 23.5 mi )
• CAD Tutor

• Male Age 37
• Member Since: 05/2017
• Will travel up to 20 miles
• Rates from $50.00 to $100.00 /hr
• On-line
• Also Tutors: Computer Programming, Microsoft PowerPoint, Computer, VB.net, Javascript, HTML, Microsoft Office, Graphic Design, Microsoft Excel, Desktop Publishing, Microsoft Access

Contact This Tutor View Full Profile

If you want to learn focus in it get the basics

basics, lectures, hands on practice, actual application
since 2003 fully skilled in computer hardware and software, fluent in the English language cons for writing, reading and prons for speaking, Iprovide real time solutions for my students, aand give set of lectures before he start of the tutorial. I am organized and give exact and compplete details with the entire tutorial lessons. Send me an email at mathew_nuevo@yahoo.com,I will be glad to help you with complete support, fair and equal.

Delfin M.

• La Verne, CA 91750 ( 23.8 mi )
• Expert CAD Tutor

• Male
• Member Since: 11/2016
• Will travel up to 10 miles
• Rates from $35.00 to $50.00 /hr

Contact This Tutor View Full Profile

My comments on tutoring CAD : Revit Architecture

I have a degree in Architecture with over 20 years of experience in construction documents and have more than 12 years experience in microstation and autocad and 8 years experience in Revit Architecture. I have set my current company's Revit standards. I am currently training staff fundamentals of Revit Architecture. I will however, am only interested in teaching the fundamentals of Revit Architecture.