CAD Tutors & Teachers for Lessons, Instruction or Help in Pasadena, TX

Daily Thermetrics Position: Draftsman Responsibilities: Use AutoCAD to create, update and correct drawings for manufacturing and installation of temperature sensors for the refining and petrochemical industries. Specify and locate materials/parts. Develop drawings from rough sketches and verbal instructions from costumers. Berger Iron Works, Inc Position: Draftsman Responsibilities: Use AutoCAD to create structural and fabrication drawings of steel structures such as beam connections, ladders, stairs, cages, handrails and other miscellaneous structures. Complete installation drawings for their use in the field; prepare bill of materials and perform several field surveys to ensure structures clearances following all company’s drafting standards to provide clear and accurate drawings.

$ 30.00

average per hour

($25.00-$35.00)

Range

Over for years experience and extensive knowledge with Google Sketch-up, Vectorworks, Adobe software like, Photoshop, Illustrator, Indesign, and other Architectural 3D software. Basic knowledge of Rhino3D, Revit Architecture, AutoCAD, Ecotect, 3D Studio Max. Also basic knowledge of Microsoft Word, Excel, and Power Point.

$ 35.00

average per hour

($30.00-$40.00)

Range

I have 23 years of experience as a multi diciplined drafter and designer Auto Cad a and Microstation. I can tutor in both platforms from the beginners to experienced professional who may just need to brush up on their skills. I am available to teach in afternoons and evenings. Also other drafting platforms are available for tutoring.

$ 40.00

average per hour

($25.00-$55.00)

Range

I believe teaching is another way of Learning. For me, tutor should teach such a way that student should be able to solve other problems by themselves. It is more than just helping and solving problem. It is about strengthening foundation. I have more than 2 years of experience in Tutoring. I have started tutoring during my graduate study to Highschool and Freshman Student. Today I am teaching students ranging from Middle School, High School, College Level and Certain professionals. I am excellent in Math and Computers. I have scored 800 out of 800 and GRE exam. I always had A+ in School and My GPA is 3.8

$ 32.50

average per hour

($25.00-$40.00)

Range

Over 27 yrs utilizing AutoCAD and ProEngineer/Creo in Mechanical engineering environment in Aerospace, Industrial equipment, and Oil and Gas industries. 27 yrs. as a mechanical drafter then advanced to the position of Mechanical designer with companies such as Tymco,Inc., HydroTex Dynamics, Weatherford, Inc., Schlumberger, and Oceaneering (OSS and OIE). Currently has 4 patent applications with Weatherford, Inc. Proficient in 3D modeling, assemblies and 3D printing for rapid prototyping. Laid-back, prefer to have questions emailed ahead so we can concentrate on the problem.

$ 30.00

average per hour

($20.00-$40.00)

Range

More than 14 years experiences in teaching , translation and interpreter between three languages arabic , english and german with modern stylish , also expert in graphics design , auto cad , max , and studio effects , also i can teach arabic history , Quran , prayer and arabic culture . I have experiences in engineering design and landscape design .

$ 35.00

average per hour

($30.00-$40.00)

Range

Civil and mapping I have extensive experience with AutoCad; APDM, Microstation, ArcGIS Reader, GEO Opensource, MS Office Suite; (Word, Excel, Powerpoint) and Oracle dBase 1) I designed and produced for a client a practical manual for in-house entry level drilling engineers training; two year development process. 2) I have as-built entire O&G storage facilities in remote and foreign locations lacking current geodata references. 3) I have extensive experience in UST removal and AST installation planning along with supporting disciplines, (skid, concrete, electrical, piping, ROW permitting). This contributed to closing multi-million dollar contact for employer with City of Houston, General Services Department. 4) I have experience converting analog alignment sheets and sub-division plats in

$ 30.00

average per hour

($25.00-$35.00)

Range

Cad 2 D and 3D focus on Piping Drafting and Mechanical Performs Senior Piping Designer (CADworx) and Engineering assignments to design a piping system that is economical and will work satisfactory and safe operation Fifteen years of experience as green and brawn construction within upstream, downstream Refinery, Oil & Gas industry with working on site. And production of engineering drawings In base of the projects from home or construction of industrial facilities

$ 37.00

average per hour

($35.00-$39.00)

Range

PROFESSIONAL EXPERIENCE EUBANKS GROUP ARCHITECTS 4116 Center St. - Houston, TX 77007 ARCHITECTURAL DESIGNER / INTERN (September 2013 – Present) •Assist in production of Construction Document sets utilizing AutoCAD 2013 and Revit 2014.•Office computer data organization (Microsoft – Outlook, Excel, Access, Word).•Presentation Graphics work (Adobe – Photoshop, Illustrator, PageMaker).•Construction of architectural models. •Job site measurements and preparing as-built background drawings. Project code, and product research. Coordination with consultants and construction general contractors• Office administration PARAGAN DESIGN SOLUTION 14022 Hempstead rd. Houston, TX 77040 STUDENT INTERN (Summer 2012) •Assist in production of Construction Document sets utilizing AutoCad 2011 EDUCATION CENTER OF TECHNICAL FORMATION STEIMETZ Ouidha, Benin Baccalaureate Of Civil Engineering (Septe

$ 40.00

average per hour

($30.00-$50.00)

Range

I as design tutor I'm very hands on. I'll usually start by showing how it's done than allow the learning to mimic my actions. My name is Brandon Moss I'm a graduate from the Art Institute of Houston with a bachelor's degree in Design & Technical Graphics, and an associates degree in graphic design. With my experience in CAD and Design I'm concern to be an asset to your company. I've been using Autocad for five years and am efficient at both the 2D and 3D aspects of the software. I also have experience with BIM software such as Plant 3D and P&ID as well experience in Revit. I also have eight years experience in graphic design using using photoshop, illustrator, and indesign.

$ 30.00

average per hour

($20.00-$40.00)

Range

30+years exp. in microstation 2d 20+years exp. in autocad 2d hands on (show by example) 30+ years experience in microstation 2d (Transportation,petrochemical,etc...) Levels,file manipupation 20+ years experience in autocad 2d (Transportation,petrochemical,etc...) Layers,file manipulation 40+ years experience overall experience in drafting and design (architectural,piping,structural,mechanical,etc..) view projection,sections,detailing,

$ 40.00

average per hour

($35.00-$45.00)

Range

I have 4 years experience, and also have an Associates degree in CADD (Computer Aided Drafting & Design). During my career, I also found that knowing Project Management and Design experience that also helps in CAD. I have worked with the following programs; AutoCAD 2013, 2014, 2015, 3D, Revit, Inventor, 3DS Max, Maya, SolidEdge, and SolidWorks. Hands on practice and explanation of the process. Direct and truthful teaching style.

$ 27.50

average per hour

($22.00-$33.00)

Range

Architecture & engineering drawings Teach is one of my passion. Actually, I am teaching at University and College: Scheduling, Mech. Plumbing & Elect. Systems, Materials & Methods, and Health & Safety, Environment & Quality (HSEQ) & OSHA, Building Codes. AutoCAD-2014, Specialized Basic CAD and Technical Drafting for face to face, hybrid and online classes. Step by step process according with student level and objectives.

$ 40.00

average per hour

($30.00-$50.00)

Range

10 years Providing industrial design support with Autocad 10+ Years providing drafting and design support in electrical discipline using AutoCAD and CadWorks Software. Well rounded in facility grounding, area classification, plant lighting, cable tray, and power distribution design. Read schematic and ladder logic. Proficient in specifying electrical cables, parts, components, support and apparatus. Familiar with National Electrical Codes, Nation Fire Protection Association, and many typical industrial practices. Perform engineering functions and strong with technical writing and customer communication. Education: ?? Penn Foster College – Electrical Engineering Technology AAS Training / Certification: ? Industrial Electrical Technology AC/DC System Components Course (Penn Foster) 2009 ? CenterOne (Rockwell Automation Software) Product Selection Toolbox Tra

$ 20.00

average per hour

($15.00-$25.00)

Range

I have spent the last 13 years utilizing different CAD technologies, primarily working with Autodesk technologies and CADWorx software design suite. I have been involved with the design and construction of many types of facilities and equipment. Teaching how to use CAD software has been a regular part of my job for nearly my entire career.

$ 42.50

average per hour

($30.00-$55.00)

Range