|
Bryam R. - Spring, TX 77386 (34.8 mi) - CAD Tutor - $40.00/hr.
Worked for gear company. Making drawings and designs for adapters, flanges, extensions and more. Gears are used in valves for use in the energy, food, and oil industry.
Currently employed at NOV solids control department making drawings and designs for skids for all solid control systems including gumbo boxes, shakers, mud coolers, etc.
Also Tutors:
|
$ 40.00
average per hour
($30.00-$50.00)
Range
|
|
Brandon M. - Houston, TX 77067 (39.7 mi) - CAD Tutor - $30.00/hr.
My name is Brandon Moss I'm a graduate from the Art Institute of Houston with a bachelor's degree in Design & Technical Graphics, and an associates degree in graphic design. With my experience in CAD and Design I'm concern to be an asset to your company. I've been using Autocad for five years and am efficient at both the 2D and 3D aspects of the software. I also have experience with BIM software such as Plant 3D and P&ID as well experience in Revit. I also have eight years experience in graphic design using using photoshop, illustrator, and indesign. I as design tutor I'm very hands on. I'll usually start by showing how it's done than allow the learning to mimic my actions.
Also Tutors: Microsoft PowerPoint, Microsoft Office, Graphic Design, SketchUp
|
$ 30.00
average per hour
($20.00-$40.00)
Range
|
|
dennis c. - Houston, TX 77067 (39.7 mi) - CAD Tutor - $40.00/hr.
30+years exp. in microstation 2d
20+years exp. in autocad 2d hands on (show by example) 30+ years experience in microstation 2d (Transportation,petrochemical,etc...) Levels,file manipupation
20+ years experience in autocad 2d (Transportation,petrochemical,etc...) Layers,file manipulation
40+ years experience overall experience in drafting and design (architectural,piping,structural,mechanical,etc..)
view projection,sections,detailing,
Also Tutors:
|
$ 40.00
average per hour
($35.00-$45.00)
Range
|
|
Dale S. - Houston, TX 77068 (40.7 mi) - CAD Tutor - $34.00/hr.
• Remove and Install CPU’s, SECC processors, PGA processor, Motherboard Form Factors and Components, Motherboard from a computer case, Configuring BIOS, CMOS, and Boot Sequence, Configure and Troubleshoot Power Management Features, Configure, Optimize, and Troubleshoot Laptops.
• Install and Remove RAM, a Floppy Drive and Second IDE Hard Drive, Managing Disk, Partitions, and Files, Identifying and Installing Computer Devices and Drivers.
• Install and Configure Video Displays, Troubleshooting Hardware, Printers, and Laptops.
• Install, Configure, Optimize and Upgrade Storage Devices, Preventative Maintenance and Safety, Resolving Printer Problems.
• Troubleshooting Error Messages and Perform System Recovery.
• Network Installation and Troubleshooting, Install, Configure, Optimize, Upgrade and Troubleshoot Networks, Network Protocols, Services, and Technologies.
• Wireless Network
Also Tutors: Computer Programming, Microsoft PowerPoint, Computer, VB.net, HTML, Microsoft Office, Desktop Publishing
|
$ 34.00
average per hour
($32.00-$36.00)
Range
|
|
JUGAL S. - Houston, TX 77002 (41.5 mi) - CAD Tutor - $32.50/hr.
I have more than 2 years of experience in Tutoring. I have started tutoring during my graduate study to Highschool and Freshman Student. Today I am teaching students ranging from Middle School, High School, College Level and Certain professionals. I am excellent in Math and Computers. I have scored 800 out of 800 and GRE exam. I always had A+ in School and My GPA is 3.8 I believe teaching is another way of Learning. For me, tutor should teach such a way that student should be able to solve other problems by themselves. It is more than just helping and solving problem. It is about strengthening foundation.
Also Tutors: Microsoft PowerPoint, CSS, Javascript, HTML, Microsoft Excel, Microsoft Access
|
$ 32.50
average per hour
($25.00-$40.00)
Range
|
|
Robin C. - Webster, TX 77598 (42.5 mi) - CAD Tutor - $30.00/hr.
Over 27 yrs utilizing AutoCAD and ProEngineer/Creo in Mechanical engineering environment in Aerospace, Industrial equipment, and Oil and Gas industries. 27 yrs. as a mechanical drafter then advanced to the position of Mechanical designer with companies such as Tymco,Inc., HydroTex Dynamics, Weatherford, Inc., Schlumberger, and Oceaneering (OSS and OIE). Currently has 4 patent applications with Weatherford, Inc. Proficient in 3D modeling, assemblies and 3D printing for rapid prototyping. Laid-back, prefer to have questions emailed ahead so we can concentrate on the problem.
Also Tutors:
|
$ 30.00
average per hour
($20.00-$40.00)
Range
|
|
Ricardo I. - Houston, TX 77075 (42.7 mi) - CAD Tutor - $30.00/hr.
Daily Thermetrics
Position: Draftsman
Responsibilities: Use AutoCAD to create, update and correct drawings for manufacturing and installation of temperature sensors for the refining and petrochemical industries. Specify and locate materials/parts. Develop drawings from rough sketches and verbal instructions from costumers.
Berger Iron Works, Inc
Position: Draftsman
Responsibilities: Use AutoCAD to create structural and fabrication drawings of steel structures such as beam connections, ladders, stairs, cages, handrails and other miscellaneous structures. Complete installation drawings for their use in the field; prepare bill of materials and perform several field surveys to ensure structures clearances following all company’s drafting standards to provide clear and accurate drawings.
Also Tutors:
|
$ 30.00
average per hour
($25.00-$35.00)
Range
|
|
Andrea C. - Houston, TX 77033 (43.3 mi) - CAD Tutor - $40.00/hr.
I have 23 years of experience as a multi diciplined drafter and designer Auto Cad a and Microstation. I can tutor in both platforms from the beginners to experienced professional who may just need to brush up on their skills. I am available to teach in afternoons and evenings. Also other drafting platforms are available for tutoring.
Also Tutors:
|
$ 40.00
average per hour
($25.00-$55.00)
Range
|
|
Gwenaelle M - Spring, TX 77373 (35.6 mi) - CAD Tutor - $39.50/hr.
I would describe myself as a very patient and understanding person. I always make sure that the student understand the concept and is comfortable with the explanations given to him/her before continuing with the problem. Being successful in tutoring, is realizing that the student is able to complete a problem on his/her own without my help. I earned two bachelors degrees from LSU: one in Mathematics and one in Computer Sciences. But I would be more interested in tutoring FRENCH. I am a native FRENCH speaker and I've been in the country for over 20 years. I go back to France every summer to visit my family and would like to share my experience and teach the languague to students in the Spring, TX area. I've also been a tutor for the past 8 years at Tutor.com and tutor Elementary math, Middle school math and Algebra.
Also Tutors: Javascript, HTML, C++, ASP.NET, Microsoft Office, Graphic Design, Microsoft Excel, Desktop Publishing, Microsoft Access
|
$ 39.50
average per hour
($43.00-$50.00)
Range
|
|
Yolanda W - Port Arthur, TX 77640 (36.9 mi) - CAD Tutor - $39.50/hr.
As an Graduate of Applied Science of Industrial Instrumentation. I was extremely driven to accomplish a long sought after goal of completing college while shift working and raising a family of four sons all on my own. I graduated Phi Theta Kappa, National Dean's List, and was offered internship in three different countries. China, Europe and Austrila. I taught all four of my son's to walk, talk, read, count, and finally socialites. My oldiest son is dyslexic and we colaborate daily comming up with new exciting ways to look at different mild stones of his learning patterns. My life has been filled with teaching and working with children. At the age of ninteen as a very young mother I felt a sense of duty in teaching my children how to achive higher than they can ever have imagined. I love to see the look of awe on their faces when they realize that they to can understand which ever subjec
Also Tutors: Microsoft Office, Microsoft Excel, Desktop Publishing, Microsoft Access
|
$ 39.50
average per hour
($41.00-$52.00)
Range
|
|
Jeffrey B - League City, TX 77573 (46.4 mi) - CAD Tutor - $54.00/hr.
Experience tutoring math to elementary age children through adults in college. I have earned a BS in Chemical Engineering from the University of New Mexico, and I am working on completing pre-med requirements at the University of Houston Clear Lake. I have completed 15 credit hours in Biological Sciences with a GPA of 4.0.
I also have two years of experience as a community mentor, working with elementary school children. I enjoy teaching children. I normally have a very relaxed style, but I emphasize setting goals and completing the task at hand. I gain a great deal of personal satisfaction in helping others learn. I believe the most important attributes of a good teacher are, 1. keeping the student's best interest in mind, and 2. maintaining a positive attitude and keeping the learning process interesting for the student.
Also Tutors: Microsoft Excel
|
$ 54.00
average per hour
($55.00-$67.00)
Range
|