College Mechanical Engineering Tutors & Teachers for Lessons, Instruction or Help in Los Angeles, CA

At UCSD we take several classes that are very alike to the curriculum of a mechanical Engineer. I can teach either one to one or multiple kids. I have dealt with both cases and I when I am dealing with multiple kids I try to pair them up by their struggles so that they can overcome the obstacle together. I try to focus on what my pupil are struggling on and go over that with more detail then that of the stuff they already know. I teach the material at a pace that is right for everyone but I slow down if anyone needs me too. I started tutoring in middle school in the field of math, science and history. When I was in High School I tutored kids for the clubs I was in such as the Spanish Honors Society, Math Club, National Honors Society, and California Scholarship Federation. On top of tutoring kids at my high school I would tutor elementary kids that were taking the high school placement e

$ 20.00

average per hour

($15.00-$25.00)

Range

I believe in conceptual knowledge of student to built up a base. You can ask me any queries anytime. Worked as structural designer for LnT construction( year 2015-17) Freelancer designer since 2015 till now. Designing of roof truss profile, loads calculation of building, assist students in there assignment, seismic calculation of building Prepared students for maths and science Olympiad in college level. Working for government organisation MCD as structural engineer (2017- till now)

$ 32.50

average per hour

($25.00-$40.00)

Range

Further details available on request. Rod has over a decade of teaching experience as a Lecturer at Oxford University, teaching Mathematics/Physics/Engineering to 1st and 2nd year Undergraduates, and where he obtained his PhD (D.Phil) and conducted several years’ research in the field of jet/rocket propulsion. Rod also has two decades experience as a private tutor, teaching Engineering, Physics and Mathematics to students from the Universities of Cambridge, Oxford, Imperial College London, University College London, Boston, Queen Mary University of London, Loughborough, London School of Economics, New College of the Humanities, Southampton, Nottingham, Warwick, Liverpool, Oxford Brookes, London City, Derby, and others, at both undergraduate and masters level. Rod also has experience teaching industrial professionals and students at all pre-University levels from GCSE to IB, includ

$ 150.00

per hour

Graduated from number "1" engineering university in Iran (Sharif University of Technology, among top 150 World Universities) with total GPA 3.9/4.0, I have a solid background in Mechanical Engineering and am honored to have the opportunity to share my knowledge with high school, college and university students to help them build and develop their academic foundation as well. I have experience teaching a number of college students in my home country, helping them prepare themselves for university entrance exam.

$ 35.00

average per hour

($30.00-$40.00)

Range

BAS Mechanical engineering 3 yrs engineering experience at Nortthrop Grumman including: 1. 3D modeling in Pro E, and Catia for the F35 program 2. Project Management on the F18 line which has taken me to Japan and China for supplier audits 8 Years of experience with Sanyo Denki as a design engineer and new product introduction management

$ 24.00

average per hour

($18.00-$30.00)

Range

I am a highly motivated Mechanical Engineer with a Bachelor of aeronautical engineering. I have developed key project management skills and the ability to improve communication with the broader project team. As I am required to ensure risk assessments are correctly implemented and current legislative and environmental guidelines are followed, successful communication is critical to my role. I have a thorough knowledge of HVAC, reverse osmosis systems, Automotive and I am experienced in directing and managing the on-site team, including contractors. I possess excellent interpersonal and communication skills and my multitasking abilities are advanced. Given my experience I hope to have the opportunity to work with you

$ 27.50

average per hour

($15.00-$40.00)

Range

My approach relies on developing the ability of the student to "store" the fundamentals of the subject (without projecting much of my own style of problem solving techniques). In other words, I equip my students with the tools, while at the same time help them discover their ability to be creative and efficient in using these tools. Having been trained in a French system during high school years, I know very well how to deter the fear from seemingly complex subjects, or seemingly too much information. During my training at Union University, I was hired in the Hundley Center as a Tutor in Math, Physics, and Engineering subjects. Through tout my experience in tutoring inside and outside Union (private home tutoring) I was successful in bringing my students grades from C to A in just few sessions. I enjoyed assisting others in better understanding scientific subjects. Almost all my students

$ 32.00

average per hour

($25.00-$39.00)

Range

solving sample problems ,and home works WORKED AS A FULL TIME STRUCTURAL ENGINEER UNDER A S.E. (REGISTERED STRUCTURAL ENGINEER) IN RESIDENTIAL AND COMMERCIAL PROJECTS SUCH AS HOSPITALS, AIRPORTS, HOTELS, OFFICE BUILDINGS, PARKING STRUCTURES, CONDOMINIUMS, AND CUSTOM HOMES. RESPONSIBILITIES INCLUDE DESIGN AND ANALYSIS OF VARIOUS STRUCTURAL ELEMENTS FOR GRAVITY, SEISMIC AND WIND LOADS USING BOTH LOAD AND RESISTANCE FACTOR DESIGN (LRFD) AND ALLOWABLE STRESS DESIGN (ASD) PER 2007-CBC. PREPARATION OF STRUCTURAL CALCULATION FOR BEAMS, COLUMNS, CONCRETE DECKS, SHEAR WALLS, RIGID FRAMES, RETAINING WALLS, RAISED AND SLAB FOUNDATIONS,mat footing design ,tenant improvement commercial building design and steel storage tank design, SHORING (SOLDIER PILES INCLUDING TIEBACKS & PIPE RAKERS ), AND MISC. STRUCTURAL ELEMENTS ALONG WITH PREPARATION OF CAD STRUCTURAL DRAWINGS FOR FOUNDATION PLAN, FRAMING PLA

$ 71.00

average per hour

($36.00-$106.00)

Range

Also, I have had experiences in tooling and ground support equipment. First, I have had 26 year experiences in aircraft (i.e. C-17, 787 & Delta IV rocket) structural design, analysis and repair. Due to lack of new order for C-17 transport airplanes, I was laid off by Boeing on 5-2-2014. I have been eligible for social security benefits since October 2014. However, I am in such a good shape to be able to play tennis games. I would like to work for 5 more years minimum to contribute my engineering knowledge and enrich my personal life. I am looking forward to working as a mechanical engineering tutor.

$ 35.00

average per hour

($30.00-$40.00)

Range

The student will do the drawing as i guide him in front of pc. This teaches more and i see this as more productive in teaching new students. I have strong experienced different types of CAD softwares for different CAD companies. I have done Telecommunication, MEP (Electrical) and Tool Design. At first i learn by myself, i strive to get more techniques in CAD particulary Solidworks and AutoCAD. In time i manage to teach ne employee with the software the company was using. At present i still teach people who want to learn Solidworks and AutoCad.

$ 24.00

average per hour

($18.00-$30.00)

Range

I'm a graduate of UCLA Engineering with a passion for explaining how the physical world works through math and physics along with 14 years of tutoring experience in those subjects, test prep, and mentorship programs. The teaching strategy I believe in emphasizes subject fundamentals, a powerful and necessary tool for higher problem solving. This strategy has proven very effective regardless of the student's educational background or mental ability. Besides being knowledgeable, I am motivating, caring, and patient in guiding your student to academic success! EXECUTIVE FUNCTIONING: Executive Functioning is a separate realm that tutoring can assist in. It deals with cognitive processes including organization, time management, and study skills. Much of the difficulty students face in academic subjects can be attributed to the lack of executive functioning. They either cannot keep up

$ 105.00

average per hour

($60.00-$150.00)

Range

I like to use a white board when I tutor, it makes it easier to solve many different problems without having to use paper. I also prefer that students bring questions and homework problems to tutor sessions that way I have a better understanding of what they need to learn. Currently just graduated with a Degree in Mechanical Engineering from California State University Long Beach. I have tutored several different courses throughout my career. Including Thermodynamics, Numerical Methods for Engineers, Mechanics of Materials, Calculus, Differential Equations and more. I had a high GPA in college and was a very hard worker. Usually the way I tutor is the student brings me homework problems or questions about a topic and I walk them through how to solve them.

$ 37.50

average per hour

($35.00-$40.00)

Range

36 years in Engineering 12 at NASA JPL, 5 years teaching engineering at West Coast and Cal State U. Worked on 12 major spacecraft, worked on 2 shuttle missions, worked on 2 cruise missiles, performed reliability analysis on aircraft O2 systems, Licensed Engineer State of California. Tested Payloads on F18 and F35 for Boeing, Vibration testing, Acoustic Testing, Static Testing, Reliability Testing work well with interested motivated students

$ 30.00

average per hour

($25.00-$35.00)

Range

Interactive Problem Solving Skills Teaching Mechanical Engineering courses since 2006 in the following universities - UC Irvine - Cal Poly Pomona - CSU Long Beach I have taught Graduate and Undergraduate courses in the area of thermal science and fluid mechanics in the Mechanical Engineering department including Heat Transfer, Fluid mechanics, Energy Management courses.

$ 60.00

average per hour

($40.00-$80.00)

Range