Ramez E.

• Rancho Cucamonga, CA 91730 ( 23.8 mi )
• CAD Tutor

• Male Age 39
• Member since: 11/2015
• Will travel up to 20 miles
• Rates from $25 to $35 /hr
• On-line In-Home In-Group
• Also Tutors: Microsoft PowerPoint, Computer, Microsoft Office, Microsoft Excel

Contact this Tutor View Full Profile

A Little Bit About Me...

Medi-Cal Biller 02/2014 - 05/2015 & 09/2015 – Present Owl Western pharmacy o Create and maintain a new ways to save money and reduce the cost. o Solve any problem to enhance the performance of the pharmacy. o Create very good relations with the customers. o Updating the statues of the patients in the facilities. o Adding the insurances for the patients & bill them. o Make priors authorizations for the rejected claims. Project Engineer 05/2014 - 09/2015 Electracorp, Inc. o Managing, editing and adding all the drawing by "Bluebeam Revu CAD" o Reading all the cut sheets from the vendors, creating the submittals. o Create the RFI's "Request for Information", Submittals, Releases, etc and sent it to the General Contractor. o Create the BOM "Bill of Materials", a material release logs. o Follow up the RFI's, Submittals, Releases, etc and maintain a log for every single thing. o Cr ... read more

Iulian M.

• Los Angeles, CA 90001 ( 10.5 mi )
• CAD Tutor

• Male Age 31
• Member Since: 01/2017
• Will travel up to 20 miles
• Rates from $15.00 to $20.00 /hr
• On-line
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

6 years of experience of using CAD software

I have an experience of about 6 years in using Sketchup and other CAD softwear. I am mainly specialized in using CAD for architectural design, but I also used if for product design as also. I am very familiarized with the extensions that Sketchup uses. I published several paper which concern the use of CAD technology for preserving architectural heritage.
I use a very interactive teaching style based on the student's needs, I am very flexible and usually use a wide range of techniques for getting the best results.

jay j.

• Tarzana, CA 91356 ( 22.8 mi )
• CAD Tutor

• Male
• Member Since: 08/2017
• Will travel up to 30 miles
• Rates from $25.00 to $50.00 /hr
• I am a Certified Teacher
• In-Home In-Group

Contact This Tutor View Full Profile

Computer | Internet | Design

I have trained many students, engineers and designers to use the software efficiently for personal, educational & professional projects. I also worked for a construction company that did stone work for high-end residential projects, an interior designer, a general contractor, an architect and a manufacturer.
Hands-on, quick and precise. I only teach the things a student need in the software - features they don't need are only covered if requested and are mentioned anyway. My goal is to get you up and running with Autocad as soon as possible so you can work and learn on your own - That's how I personally learned!

Erika H.

• Los Angeles, CA 90065 ( 7.2 mi )
• CAD Tutor

• Female
• Member Since: 05/2016
• Will travel up to 5 miles
• Rates from $55.00 to $60.00 /hr
• On-line
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

SKETCHUP TUTORING

I use a 3 button mouse & a MAC, Sketchup 2019, everyone has different ways of learning and I will adjust my lesson and my students ability. I will teach you the basics of Sketchup, however, if you have a project that you are working on and need help completing it, please let me know and we can work on your project to completion. Please email me at : erikahanan@gmail.com to discuss teaching options. Available for freelance Sketchup/ Vray / Interior Design Projects. Please message me at: erikahanan@gmail.com to discuss your project.
Graduated from Interior Designers Institute in Newport Beach, CA. I have many years of experience; working with Sketchup, CAD, & Vray. I am patient with my students and love to help them bring their projects to life. My work consists of Residential & Commercial contracts/ build. Contact me at erikahanan@gmail.com for a chat.

Frank H.

• Los Angeles, CA 90015 ( 9.5 mi )
• CAD Tutor

• Male Age 50
• Member Since: 07/2013
• Will travel up to 20 miles
• Rates from $20.00 to $39.00 /hr
• On-line In-Home In-Group
• Also Tutors: Computer, Graphic Design, Desktop Publishing

Contact This Tutor View Full Profile

Learn what you like love what you do.

i have worked in both fields for many years. in drafting i in almost every type of engineering there is, Three of which in HVAC Drafting and Jr Design. as a Graphic Designer i also have a wide verity of experience from screen printing set up i also have experience in printing set up and digital set up as in for web use.
i show you what you need to know as you work on your laptop or desktop.

Apoorv G.

• S, CA 90010 ( 11.2 mi )
• CAD Tutor

• Male
• Member Since: 02/2012
• Will travel up to 50 miles
• Rates from $25.00 to $50.00 /hr
• On-line In-Home In-Group
• Also Tutors: Computer Programming, Microsoft PowerPoint, Objective C, CSS, Computer, Javascript, HTML, C++, ASP.NET, Microsoft Office, Microsoft Excel, Microsoft Access

Contact This Tutor View Full Profile

SPSS, Statistics, Math & MBA level courses Tutor

Dear Student, Hi. I am a Math, Statistics & Business Finance tutor and have been tutoring these two and other subjects for last 20 years. I did masters in Math from Lucknow University India in 1983 and then again another Masters from Canada ( University of Western Ontario ) in Statistics 1n 1989. I had physics, chemistry as minor subjects during undergrad. I have always been an A+ student and also was recommended for Gold Medal in Canada when I was doing Masters. During 1989-90 I also taught several undergraduate math & stats class as a sub when my professors were on leave. I also tutored math & statistics other college students when I was studying at University of Western Ontario. In 1991, I started working as a statistician at Addiction Research Foundation in Toronto. I worked there for 10 years and during that time I continuously tutored University of Toronto Studen ... read more

Mathew Samuelle N.

• Los Angeles, CA 90008 ( 13.6 mi )
• CAD Tutor

• Male Age 37
• Member Since: 05/2017
• Will travel up to 20 miles
• Rates from $50.00 to $100.00 /hr
• On-line
• Also Tutors: Computer Programming, Microsoft PowerPoint, Computer, VB.net, Javascript, HTML, Microsoft Office, Graphic Design, Microsoft Excel, Desktop Publishing, Microsoft Access

Contact This Tutor View Full Profile

If you want to learn focus in it get the basics

basics, lectures, hands on practice, actual application
since 2003 fully skilled in computer hardware and software, fluent in the English language cons for writing, reading and prons for speaking, Iprovide real time solutions for my students, aand give set of lectures before he start of the tutorial. I am organized and give exact and compplete details with the entire tutorial lessons. Send me an email at mathew_nuevo@yahoo.com,I will be glad to help you with complete support, fair and equal.

Jerry M.

• Long Beach, CA 90805 ( 14.2 mi )
• CAD Tutor

• Male
• Member Since: 06/2015
• Will travel up to 50 miles
• Rates from $30.00 to $40.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

If

My teaching style depends on the student. The student's goals and timeframe will dictate my strategy to accomplish the student's objectives.
Results-oriented, hands-on professional with 19 years of drafting experience. Verifiable track record for the completion of multi-million dollar projects through coordinating trades, developing partnerships, and building positive rapport with architects, engineers, local officials, vendors, and clients while maintaining costs. Versed in as-built surveying, contract negotiations, project estimating, impending design problems, document preparation, material purchasing and construction management.

Johnny A.

• Inglewood, CA 90302 ( 15 mi )
• Expert CAD Tutor

• Male Age 67
• Member Since: 04/2012
• Will travel up to 20 miles
• Rates from $35.00 to $50.00 /hr
• In-Home In-Group

Contact This Tutor View Full Profile

CAD is one of my top subjects! I have more than 20 years as an Architectural Designer with a BA Architecture. And CAD was one of many tools I used to design and put construction documents together. I can teach CAD 12 to any early version. Therefore, I consider myself an expert.

I have more than 20 years as an Architectural Designer. I have 2 years of community college in Architectural drawings/construction documents (AA Degree- Graduated)from LA Trade-Tech College. Also I have BA as an Architectural Designer from Woodbury University. I 2 years experience as Teacher's Assistant in structures (Concrete and Steel), moreover I was private tutor at Woodbury University. I had work as tutor for "BEST" company that tutor students from 1st grade to 12th grade, I spent 2 years, teaching Algebra, Geometry, Trigonometry. I have 3 years of Civil Engineer.
I had work on one to one basis as well as small groups of 5 students up to 10. I like to meet with them at libraries or specific place as mutual agreement with the student with not distraction of any kind.

Delfin M.

• La Verne, CA 91750 ( 15.9 mi )
• Expert CAD Tutor

• Male
• Member Since: 11/2016
• Will travel up to 10 miles
• Rates from $35.00 to $50.00 /hr

Contact This Tutor View Full Profile

My comments on tutoring CAD : Revit Architecture

I have a degree in Architecture with over 20 years of experience in construction documents and have more than 12 years experience in microstation and autocad and 8 years experience in Revit Architecture. I have set my current company's Revit standards. I am currently training staff fundamentals of Revit Architecture. I will however, am only interested in teaching the fundamentals of Revit Architecture.

BENNY D.

• Carson, CA 90746 ( 15.9 mi )
• CAD Tutor

• Male
• Member Since: 11/2011
• Will travel up to 40 miles
• Rates from $30.00 to $50.00 /hr

Contact This Tutor View Full Profile

More About This Tutor...

I retired from an aerospace company in the area and also just retired from USN Reserve. I was a part time AutoCAD instructor for a couple Vocational Institutes or Colleges. I served under Special Projects, trained Engineers, Architects, Draftspersons, Interior Designers and other professionals in the design trade in the use of CAD Software. I prepared the syllabus and exercises. Researched solutions to problems that were beneficial to the students/trainees. Maintained proficiency with software used. I was an Adjunct Instructor in Pasadena City College from 2002 to 2006. I taught classes/laboratory in 2- and 3-Dimensional Computer-Aided-Drafting/Design. I planned and prepared the syllabus, exercises and laboratory works. I evaluated students’ progress. I reviewed, evaluated and recommended the text/laboratory book. Maintained proficiency with software used. I can tailor the subje ... read more

Dr. John L.

• Beverly Hills, CA 90210 ( 16.2 mi )
• Expert CAD Tutor

• Male
• Member Since: 08/2019
• Will travel up to 50 miles
• Tutoring Rate: $150.00 /hr
• On-line In-Group
• Also Tutors: Computer Programming, Python

Contact This Tutor View Full Profile

Oxford University Lecturer and Research Scientist (PhD)

Rod has over a decade of teaching experience as a Lecturer at Oxford University, teaching Mathematics/Physics/Engineering to 1st and 2nd year Undergraduates, and where he obtained his PhD (D.Phil) and conducted several years’ research in the field of jet/rocket propulsion. Rod also has two decades experience as a private tutor, teaching Engineering, Physics and Mathematics to students from the Universities of Cambridge, Oxford, Imperial College London, University College London, Boston, Queen Mary University of London, Loughborough, London School of Economics, New College of the Humanities, Southampton, Nottingham, Warwick, Liverpool, Oxford Brookes, London City, Derby, and others, at both undergraduate and masters level. Rod also has experience teaching industrial professionals and students at all pre-University levels from GCSE to IB, including UK, European and USA curriculums. ... read more

JUN Q.

• Los Angeles, CA 90024 ( 17.1 mi )
• CAD Tutor

• Female
• Member Since: 08/2014
• Will travel up to 5 miles
• Rates from $30.00 to $40.00 /hr
• On-line In-Home

Contact This Tutor View Full Profile

A Little Bit About Me...

• Expert skill in AutoCAD Plant 3D 2013, AutoCAD 2015, CADWorx 2013 Production Modeling • CAD Data Files Management, Autodesk Inc., 2013 • AutoCAD Certified, Lee Learning Center • CADWorx Certified, COADE • Caesar II Certification in Piping Stress Analysis, Lee Learning Center, 2010 • PDMS Certified, Houston Community College

Gianna G.

• Montclair, CA 91763 ( 17.9 mi )
• CAD Tutor

• Female
• Member Since: 01/2016
• Will travel up to 20 miles
• Rates from $15.00 to $30.00 /hr
• I am a Certified Teacher
• On-line In-Home In-Group
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

A Little Bit About Me...

I finished my masteral degree on special education and education units from De La Salle University, Manila and have been teaching for the past eight years at Xavier School Greenhills. Four years in preparatory school then/and currently with the English Department teaching fifth graders. As a teacher I am committed to the development of effective ways to teach reading and writing to children with or without special needs. For the past three school years I have been asked to train grade school teachers on the Zaner-Bloser penmanship style. Outside school, I had conducted research and created an individualized penmanship program for students with ADHD. I was also a breakout speaker for Frontiers and Innovations in Teaching in 2014 where I discussed about exploring sites and various applications to empower students in Digital Storytelling. The next year, 2015, I was also invited to be a s ... read more

Brian E.

• Anaheim, CA 92807 ( 19.5 mi )
• Experienced CAD Tutor

• Male
• Member Since: 03/2012
• Will travel up to 20 miles
• Rates from $25.00 to $50.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

My comments on tutoring CAD : AutoCAD, Civil,

20 plus years experience in CAD Land Surveying Data to CAD Civil Engineering-Maps (Base Maps, Topo, Construction, Grading, Contours, Sub-Divisions, ALTA, Landscaping) Architectural and Landscape Plans Shop Drawings P&ID Learn how to read Blueprints and create CAD drawings from scratch! How to organize files and keep layers clean....
Open Mentor

Insiyya M.

• Torrance, CA 90503 ( 19.7 mi )
• CAD Tutor

• Female
• Member Since: 05/2012
• Will travel up to 30 miles
• Rates from $30.00 to $50.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

A Little Bit About Me...

Have a background in interior design ,autocad and 3ds max .Before i became a tutor i have gained immense knowledge as a designer and worked on many projects on autocad .Worked as an Auticad tutor at college of the canyons for 2 years+ , where i helped teaching and tutoring high school kids and design kids Autocad .Have the necessary software and sheets to teach patiently and be thorough with the basics .