|
Gianna G. - Montclair, CA 91763 (2.2 mi) - CAD Tutor - $22.50/hr.
One of my strongest suit as a teacher is to integrate technology in teaching. I finished my masteral degree on special education and education units from De La Salle University, Manila and have been teaching for the past eight years at Xavier School Greenhills. Four years in preparatory school then/and currently with the English Department teaching fifth graders.
As a teacher I am committed to the development of effective ways to teach reading and writing to children with or without special needs. For the past three school years I have been asked to train grade school teachers on the Zaner-Bloser penmanship style. Outside school, I had conducted research and created an individualized penmanship program for students with ADHD. I was also a breakout speaker for Frontiers and Innovations in Teaching in 2014 where I discussed about exploring sites and various applications to empower stude
Also Tutors: SketchUp
|
$ 22.50
average per hour
($15.00-$30.00)
Range
|
|
Ramez E. - Rancho Cucamonga, CA 91730 (4.3 mi) - CAD Tutor - $30.00/hr.
Medi-Cal Biller 02/2014 - 05/2015 & 09/2015 – Present Owl Western pharmacy
o Create and maintain a new ways to save money and reduce the cost.
o Solve any problem to enhance the performance of the pharmacy.
o Create very good relations with the customers.
o Updating the statues of the patients in the facilities.
o Adding the insurances for the patients & bill them.
o Make priors authorizations for the rejected claims.
Project Engineer 05/2014 - 09/2015 Electracorp, Inc.
o Managing, editing and adding all the drawing by "Bluebeam Revu CAD"
o Reading all the cut sheets from the vendors, creating the submittals.
o Create the RFI's "Request for Information", Submittals, Releases, etc and sent it to the General Contractor.
o Create the BOM "Bill of Materials", a material release logs.
o Follow up the RFI's, Submittals, Releases, etc and maintain a log for every single thing.
o C
Also Tutors: Microsoft PowerPoint, Computer, Microsoft Office, Microsoft Excel
|
$ 30.00
average per hour
($25.00-$35.00)
Range
|
|
Delfin M. - La Verne, CA 91750 (6.8 mi) - CAD Tutor - $42.50/hr.
Revit Architecture I have a degree in Architecture with over 20 years of experience in construction documents and have more than 12 years experience in microstation and autocad and 8 years experience in Revit Architecture. I have set my current company's Revit standards. I am currently training staff fundamentals of Revit Architecture. I will however, am only interested in teaching the fundamentals of Revit Architecture.
Also Tutors:
|
$ 42.50
average per hour
($35.00-$50.00)
Range
|
|
Brian E. - Anaheim, CA 92807 (14.3 mi) - CAD Tutor - $37.50/hr.
AutoCAD, Civil, 20 plus years experience in CAD
Land Surveying Data to CAD
Civil Engineering-Maps (Base Maps, Topo, Construction, Grading, Contours, Sub-Divisions, ALTA, Landscaping)
Architectural and Landscape Plans
Shop Drawings
P&ID
Learn how to read Blueprints and create CAD drawings from scratch!
How to organize files and keep layers clean.... Open
Mentor
Also Tutors:
|
$ 37.50
average per hour
($25.00-$50.00)
Range
|
|
Jerome M. - Costa Mesa, CA 92626 (26 mi) - CAD Tutor - $40.00/hr.
AutoCad and MicroStation 2D Online Eighteen years of Cadd drafting experience to lend my expertise to students looking to grow. I'm versatility in the drafting of mechanical, HVAC, electrical, architectural, civil, and structural design utilizing 2D Microstation and AutoCad software's. Able to work online and take individual steps with you. Can also give HTML and VB steps.
Also Tutors: HTML, Microsoft Excel
|
$ 40.00
average per hour
($30.00-$50.00)
Range
|
|
Erika H. - Los Angeles, CA 90065 (27.2 mi) - CAD Tutor - $57.50/hr.
Graduated from Interior Designers Institute in Newport Beach, CA. I have many years of experience; working with Sketchup, CAD, & Vray. I am patient with my students and love to help them bring their projects to life. My work consists of Residential & Commercial contracts/ build. Contact me at erikahanan@gmail.com for a chat. I use a 3 button mouse & a MAC, Sketchup 2019, everyone has different ways of learning and I will adjust my lesson and my students ability. I will teach you the basics of Sketchup, however, if you have a project that you are working on and need help completing it, please let me know and we can work on your project to completion.
Please email me at : erikahanan@gmail.com to discuss teaching options.
Available for freelance Sketchup/ Vray / Interior Design Projects. Please message me at: erikahanan@gmail.com to discuss your project.
Also Tutors: SketchUp
|
$ 57.50
average per hour
($55.00-$60.00)
Range
|
|
Rod P. - Newport Beach, CA 92660 (27.6 mi) - CAD Tutor - $40.00/hr.
I have been able to teach AutoCAD to the basic beginner up to the 20 year veteran. 20 years CAD experience. Familiar with AutoCAD, Drafix, VersaCAD, Solidworks, Revit, Cadkey and Sketchup. I have experience in architectural, mechanical and electrical design. 20 years ago I started off doing CAD/CAM and have learned every style since. I've taught other employees at nearly every company I've been employed at.
Also Tutors:
|
$ 40.00
per hour
|
|
Jerry M. - Long Beach, CA 90805 (27.7 mi) - CAD Tutor - $35.00/hr.
My teaching style depends on the student. The student's goals and timeframe will dictate my strategy to accomplish the student's objectives. Results-oriented, hands-on professional with 19 years of drafting experience. Verifiable track record for the completion of multi-million dollar projects through coordinating trades, developing partnerships, and building positive rapport with architects, engineers, local officials, vendors, and clients while maintaining costs. Versed in as-built surveying, contract negotiations, project estimating, impending design problems, document preparation, material purchasing and construction management.
Also Tutors:
|
$ 35.00
average per hour
($30.00-$40.00)
Range
|
|
Iulian M. - Los Angeles, CA 90001 (28.7 mi) - CAD Tutor - $17.50/hr.
I have an experience of about 6 years in using Sketchup and other CAD softwear. I am mainly specialized in using CAD for architectural design, but I also used if for product design as also. I am very familiarized with the extensions that Sketchup uses. I published several paper which concern the use of CAD technology for preserving architectural heritage. I use a very interactive teaching style based on the student's needs, I am very flexible and usually use a wide range of techniques for getting the best results.
Also Tutors: SketchUp
|
$ 17.50
average per hour
($15.00-$20.00)
Range
|
|
Frank H. - Los Angeles, CA 90015 (29.1 mi) - CAD Tutor - $29.50/hr.
i show you what you need to know as you work on your laptop or desktop. i have worked in both fields for many years. in drafting i in almost every type of engineering there is, Three of which in HVAC Drafting and Jr Design.
as a Graphic Designer i also have a wide verity of experience from screen printing set up i also have experience in printing set up and digital set up as in for web use.
Also Tutors: Computer, Graphic Design, Desktop Publishing
|
$ 29.50
average per hour
($20.00-$39.00)
Range
|
|
Apoorv G. - S, CA 90010 (31.1 mi) - CAD Tutor - $37.50/hr.
Dear Student,
Hi.
I am a Math, Statistics & Business Finance tutor and have been tutoring these two and other subjects for last 20 years. I did masters in Math from Lucknow University India in 1983 and then again another Masters from Canada ( University of Western Ontario ) in Statistics 1n 1989. I had physics, chemistry as minor subjects during undergrad. I have always been an A+ student and also was recommended for Gold Medal in Canada when I was doing Masters. During 1989-90 I also taught several undergraduate math & stats class as a sub when my professors were on leave. I also tutored math & statistics other college students when I was studying at University of Western Ontario.
In 1991, I started working as a statistician at Addiction Research Foundation in Toronto. I worked there for 10 years and during that time I continuously tutored University of Toronto Studen
Also Tutors: Computer Programming, Microsoft PowerPoint, Objective C, CSS, Computer, Javascript, HTML, C++, ASP.NET, Microsoft Office, Microsoft Excel, Microsoft Access
|
$ 37.50
average per hour
($25.00-$50.00)
Range
|
|
BENNY D. - Carson, CA 90746 (31.1 mi) - CAD Tutor - $40.00/hr.
I retired from an aerospace company in the area and also just retired from USN Reserve.
I was a part time AutoCAD instructor for a couple Vocational Institutes or Colleges. I served under Special Projects, trained Engineers, Architects, Draftspersons, Interior Designers and other professionals in the design trade in the use of CAD Software. I prepared the syllabus and exercises. Researched solutions to problems that were beneficial to the students/trainees. Maintained proficiency with software used.
I was an Adjunct Instructor in Pasadena City College from 2002 to 2006. I taught classes/laboratory in 2- and 3-Dimensional Computer-Aided-Drafting/Design. I planned and prepared the syllabus, exercises and laboratory works. I evaluated students’ progress. I reviewed, evaluated and recommended the text/laboratory book. Maintained proficiency with software used.
I can tailor the subje
Also Tutors:
|
$ 40.00
average per hour
($30.00-$50.00)
Range
|
|
Danielle S. - Beaumont, CA 92223 (32.4 mi) - CAD Tutor - $25.00/hr.
I was a dedicated student throughout high school and college. I earned my Bachelor's in Electrical Engineering from Drexel University. I know work as a systems engineer performing mission analysis on guidance, navigation, and control aspects of rocket systems. I also mentor a FIRST robotics high school team. In 6 weeks we design and manufacture a robot to play a unique game set out each year. Through this experience I have a strong educational background and first hand mentoring experience.
Also Tutors: Computer Programming, Microsoft PowerPoint, Linux, Python, C++, Microsoft Office, Microsoft Excel, Microsoft Access
|
$ 25.00
average per hour
($20.00-$30.00)
Range
|
|
Mathew Samuelle N. - Los Angeles, CA 90008 (33 mi) - CAD Tutor - $75.00/hr.
since 2003 fully skilled in computer hardware and software, fluent in the English language cons for writing, reading and prons for speaking, Iprovide real time solutions for my students, aand give set of lectures before he start of the tutorial. I am organized and give exact and compplete details with the entire tutorial lessons. Send me an email at mathew_nuevo@yahoo.com,I will be glad to help you with complete support, fair and equal. basics, lectures, hands on practice, actual application
Also Tutors: Computer Programming, Microsoft PowerPoint, Computer, VB.net, Javascript, HTML, Microsoft Office, Graphic Design, Microsoft Excel, Desktop Publishing, Microsoft Access
|
$ 75.00
average per hour
($50.00-$100.00)
Range
|