CAD Tutors & Teachers for Lessons, Instruction or Help in Chino, CA

One of my strongest suit as a teacher is to integrate technology in teaching. I finished my masteral degree on special education and education units from De La Salle University, Manila and have been teaching for the past eight years at Xavier School Greenhills. Four years in preparatory school then/and currently with the English Department teaching fifth graders. As a teacher I am committed to the development of effective ways to teach reading and writing to children with or without special needs. For the past three school years I have been asked to train grade school teachers on the Zaner-Bloser penmanship style. Outside school, I had conducted research and created an individualized penmanship program for students with ADHD. I was also a breakout speaker for Frontiers and Innovations in Teaching in 2014 where I discussed about exploring sites and various applications to empower stude

$ 22.50

average per hour

($15.00-$30.00)

Range

Medi-Cal Biller 02/2014 - 05/2015 & 09/2015 – Present Owl Western pharmacy o Create and maintain a new ways to save money and reduce the cost. o Solve any problem to enhance the performance of the pharmacy. o Create very good relations with the customers. o Updating the statues of the patients in the facilities. o Adding the insurances for the patients & bill them. o Make priors authorizations for the rejected claims. Project Engineer 05/2014 - 09/2015 Electracorp, Inc. o Managing, editing and adding all the drawing by "Bluebeam Revu CAD" o Reading all the cut sheets from the vendors, creating the submittals. o Create the RFI's "Request for Information", Submittals, Releases, etc and sent it to the General Contractor. o Create the BOM "Bill of Materials", a material release logs. o Follow up the RFI's, Submittals, Releases, etc and maintain a log for every single thing. o Cr

$ 30.00

average per hour

($25.00-$35.00)

Range

Revit Architecture I have a degree in Architecture with over 20 years of experience in construction documents and have more than 12 years experience in microstation and autocad and 8 years experience in Revit Architecture. I have set my current company's Revit standards. I am currently training staff fundamentals of Revit Architecture. I will however, am only interested in teaching the fundamentals of Revit Architecture.

$ 42.50

average per hour

($35.00-$50.00)

Range

AutoCad and MicroStation 2D Online Eighteen years of Cadd drafting experience to lend my expertise to students looking to grow. I'm versatility in the drafting of mechanical, HVAC, electrical, architectural, civil, and structural design utilizing 2D Microstation and AutoCad software's. Able to work online and take individual steps with you. Can also give HTML and VB steps.

$ 40.00

average per hour

($30.00-$50.00)

Range

I have been able to teach AutoCAD to the basic beginner up to the 20 year veteran. 20 years CAD experience. Familiar with AutoCAD, Drafix, VersaCAD, Solidworks, Revit, Cadkey and Sketchup. I have experience in architectural, mechanical and electrical design. 20 years ago I started off doing CAD/CAM and have learned every style since. I've taught other employees at nearly every company I've been employed at.

$ 40.00

per hour

My teaching style depends on the student. The student's goals and timeframe will dictate my strategy to accomplish the student's objectives. Results-oriented, hands-on professional with 19 years of drafting experience. Verifiable track record for the completion of multi-million dollar projects through coordinating trades, developing partnerships, and building positive rapport with architects, engineers, local officials, vendors, and clients while maintaining costs. Versed in as-built surveying, contract negotiations, project estimating, impending design problems, document preparation, material purchasing and construction management.

$ 35.00

average per hour

($30.00-$40.00)

Range

Graduated from Interior Designers Institute in Newport Beach, CA. I have many years of experience; working with Sketchup, CAD, & Vray. I am patient with my students and love to help them bring their projects to life. My work consists of Residential & Commercial contracts/ build. Contact me at erikahanan@gmail.com for a chat. I use a 3 button mouse & a MAC, Sketchup 2019, everyone has different ways of learning and I will adjust my lesson and my students ability. I will teach you the basics of Sketchup, however, if you have a project that you are working on and need help completing it, please let me know and we can work on your project to completion. Please email me at : erikahanan@gmail.com to discuss teaching options. Available for freelance Sketchup/ Vray / Interior Design Projects. Please message me at: erikahanan@gmail.com to discuss your project.

$ 57.50

average per hour

($55.00-$60.00)

Range

I have an experience of about 6 years in using Sketchup and other CAD softwear. I am mainly specialized in using CAD for architectural design, but I also used if for product design as also. I am very familiarized with the extensions that Sketchup uses. I published several paper which concern the use of CAD technology for preserving architectural heritage. I use a very interactive teaching style based on the student's needs, I am very flexible and usually use a wide range of techniques for getting the best results.

$ 17.50

average per hour

($15.00-$20.00)

Range

Generally one on one hands on but can teach groups. Have 30000 hours of CAD, solidworks, solid edge, AutoCAD, solidworks simulation, pro Engineer, Catia, etc, etc.. Have done CAD in many industries. Have taught CAD previously at General Atomics. Also familiar with FEA, linear and nonlinear simulation. Can also teach solidworks simulation, possibly various other softwares including other simulation packages, other FEA software (nastran for windows).

$ 47.50

average per hour

($35.00-$60.00)

Range

i show you what you need to know as you work on your laptop or desktop. i have worked in both fields for many years. in drafting i in almost every type of engineering there is, Three of which in HVAC Drafting and Jr Design. as a Graphic Designer i also have a wide verity of experience from screen printing set up i also have experience in printing set up and digital set up as in for web use.

$ 29.50

average per hour

($20.00-$39.00)

Range

I can tailor the subject matter to suit the students' needs, considering what he or she already knew. My approach in tutoring is different to my approach in classroom teaching. In tutoring the TUTEE is always in front of the computer so he or she can apply what I am saying or teaching. In short words it is more hands on since this is COMPUTER-AIDED subject. I retired from an aerospace company in the area and also just retired from USN Reserve. I was a part time AutoCAD instructor for a couple Vocational Institutes or Colleges. I served under Special Projects, trained Engineers, Architects, Draftspersons, Interior Designers and other professionals in the design trade in the use of CAD Software. I prepared the syllabus and exercises. Researched solutions to problems that were beneficial to the students/trainees. Maintained proficiency with software used. I was an Adjunct Instructor

$ 40.00

average per hour

($30.00-$50.00)

Range

I can tutor online. on phone or in person. I have a few fellow tutors who can teach in all other subjects as well. Dear Student, Hi. I am a Math, Statistics & Business Finance tutor and have been tutoring these two and other subjects for last 20 years. I did masters in Math from Lucknow University India in 1983 and then again another Masters from Canada ( University of Western Ontario ) in Statistics 1n 1989. I had physics, chemistry as minor subjects during undergrad. I have always been an A+ student and also was recommended for Gold Medal in Canada when I was doing Masters. During 1989-90 I also taught several undergraduate math & stats class as a sub when my professors were on leave. I also tutored math & statistics other college students when I was studying at University of Western Ontario. In 1991, I started working as a statistician at Addiction Research

$ 37.50

average per hour

($25.00-$50.00)

Range

since 2003 fully skilled in computer hardware and software, fluent in the English language cons for writing, reading and prons for speaking, Iprovide real time solutions for my students, aand give set of lectures before he start of the tutorial. I am organized and give exact and compplete details with the entire tutorial lessons. Send me an email at mathew_nuevo@yahoo.com,I will be glad to help you with complete support, fair and equal. basics, lectures, hands on practice, actual application

$ 75.00

average per hour

($50.00-$100.00)

Range

I have more than 20 years as an Architectural Designer with a BA Architecture. And CAD was one of many tools I used to design and put construction documents together. I can teach CAD 12 to any early version. Therefore, I consider myself an expert. I have more than 20 years as an Architectural Designer. I have 2 years of community college in Architectural drawings/construction documents (AA Degree- Graduated)from LA Trade-Tech College. Also I have BA as an Architectural Designer from Woodbury University. I 2 years experience as Teacher's Assistant in structures (Concrete and Steel), moreover I was private tutor at Woodbury University. I had work as tutor for "BEST" company that tutor students from 1st grade to 12th grade, I spent 2 years, teaching Algebra, Geometry, Trigonometry. I have 3 years of Civil Engineer. I had work on one to one basis as well as small groups of 5 students up to 1

$ 42.50

average per hour

($35.00-$50.00)

Range