Ramez E.

• Rancho Cucamonga, CA 91730 ( 29.4 mi )
• Engineering Tutor

• Male Age 39
• Member since: 11/2015
• Will travel up to 20 miles
• Rates from $25 to $35 /hr
• On-line In-Home In-Group
• Also Tutors: Electrical Engineering

Contact this Tutor View Full Profile

More About This Tutor...

Medi-Cal Biller 02/2014 - 05/2015 & 09/2015 – Present Owl Western pharmacy o Create and maintain a new ways to save money and reduce the cost. o Solve any problem to enhance the performance of the pharmacy. o Create very good relations with the customers. o Updating the statues of the patients in the facilities. o Adding the insurances for the patients & bill them. o Make priors authorizations for the rejected claims. Project Engineer 05/2014 - 09/2015 Electracorp, Inc. o Managing, editing and adding all the drawing by "Bluebeam Revu CAD" o Reading all the cut sheets from the vendors, creating the submittals. o Create the RFI's "Request for Information", Submittals, Releases, etc and sent it to the General Contractor. o Create the BOM "Bill of Materials", a material release logs. o Follow up the RFI's, Submittals, Releases, etc and maintain a log for every single thing. o Cr ... read more

Ronald N.

• Temecula, CA 92591 ( 11.9 mi )
• Engineering Tutor

• Male
• Member Since: 11/2015
• Will travel up to 50 miles
• Tutoring Rate: $85.00 /hr
• On-line In-Home In-Group
• Also Tutors: Environmental Engineering, Materials Engineering, Industrial Engineering, Chemical Engineering

Contact This Tutor View Full Profile

Science, Engineering & Math Tutor & Consultant

Tutor has expertise in new product and technology development from conceptualization to commercialization; and experience in leading and training multi-functional teams to this end. Degrees: PhD in Chemical Engineering & Technology; Diploma in Cosmetic Science. 16 years of experience in the development and introduction of new consumer products. 17 years of experience in the development and introduction of new chemical intermediates. Current areas of activity include the formulation and manufacture of home fragrance consumer products such as air fresheners, room sprays, fragrance diffusers and CANDLEs. Tutor is an author of articles on tracking renewable material opportunities in consumer products. Expert is an associate of Market Chemica and is conducting research on global supply chain of renewable materials and identifying application opportunities.

Nicholas P.

• Corona, CA 92883 ( 13.8 mi )
• Experienced Engineering Tutor

• Male Age 33
• Member Since: 05/2012
• Will travel up to 20 miles
• Rates from $20.00 to $35.00 /hr
• In-Home In-Group
• Also Tutors: Mechanical Engineering, Materials Engineering, Civil Engineering

Contact This Tutor View Full Profile

More About This Tutor...

I am a senior undergraduate student enrolled at Georgia Tech. My major is nuclear and radiological engineering, but i have experience in the fields of mechanical and civil engineering. I am most experienced in the subjects of mathematics, radiation physics, and electromagnetics including: algebra (I and II), trigonometry, differential equations, calculus 1 and 3, reactor physics, radiation protection/particle physics, thermodynamics, classical mechanics. I also have basic college level experience in the fields of chemistry and biology.
I encourage students to question problem solving methods in order to understand the fundamentals. After an explanation of the material I often follow up with several example problems to help students test their mastery of the subject. I do not emphasize memorizing equations, because students do not learn about the physical phenomena by memorization. ... read more

Danielle S.

• Beaumont, CA 92223 ( 16.2 mi )
• Engineering Tutor

• Female Age 31
• Member Since: 02/2018
• Will travel up to 20 miles
• Rates from $20.00 to $30.00 /hr
• On-line In-Home In-Group
• Also Tutors: Electrical Engineering, Aerospace Engineering

Contact This Tutor View Full Profile

More About This Tutor...

I was a dedicated student throughout high school and college. I earned my Bachelor's in Electrical Engineering from Drexel University. I know work as a systems engineer performing mission analysis on guidance, navigation, and control aspects of rocket systems. I also mentor a FIRST robotics high school team. In 6 weeks we design and manufacture a robot to play a unique game set out each year. Through this experience I have a strong educational background and first hand mentoring experience.

yu-ting s.

• Lake Forest, CA 92630 ( 22.5 mi )
• Engineering Tutor

• Male
• Member Since: 05/2015
• Will travel up to 40 miles
• Rates from $30.00 to $40.00 /hr
• On-line In-Home In-Group
• Also Tutors: Civil Engineering

Contact This Tutor View Full Profile

A Little Bit About Me...

•Doctor of Philosophy, Civil Engineering, U.S.A. Professional Engineer, State of California COURSES TAUGHT • Soil Mechanics Laboratory • Soil Mechanics • Geotechnical Engineering • Foundation Design • Algebra • Calculus • Number Theory • Geometry • Probability • Reliability PROFESSIONAL WORK EXPERIENCE Geotechnical Engineer,

Vodrick G.

• Corona, CA 92880 ( 23.2 mi )
• Engineering Tutor

• Male
• Member Since: 08/2012
• Will travel up to 20 miles
• Rates from $35.00 to $40.00 /hr

Contact This Tutor View Full Profile

More About This Tutor...

13063 Quarter Horse Dr. Corona California, 92880 HM #(951)427-1303 Cell #(562)209-3705 Vodrick A. Griffin Objective Piping CAD Designer/Operator position Experience 04/2012-Present FLUOR ENGINEERS San Francisco/Dublin, CA Piping Senior Designer - I Performed P&ID walkdowns marked up drawings as required. I performed tie-in locations,demo drawings for system being reworked. I took Field measurements of existing equipment for space allocations using (PDS) 3D plant design system., routing of existing piping systems for space allocations using (PDS) 3D plant design system. I also assisted in the investigation of documents from document control. This job is for a revamp project for Kennecott Utah Copper Mining & Metals 09/2011-03/2012 TEVA PHARMACEUTICAL Irvine, CA Engineering Drafter ... read more

hambarsoum h.

• Ontario, CA 91761 ( 26.3 mi )
• Engineering Tutor

• Male Age 75
• Member Since: 05/2012
• Will travel up to 40 miles
• Rates from $34.00 to $39.00 /hr
• On-line In-Home In-Group
• Also Tutors: Mechanical Engineering, Materials Engineering

Contact This Tutor View Full Profile

A Little Bit About Me...

A Designer Engineer with experience in but not limited to designing equipment and systems in a manufacturing environment. Expertise in designing machinery both heavy and light construction including roll formers and punch presses, relocation, renovation and addition of new equipment and/or new production lines (i.e. GA’s and P & ID’s).

Steve G.

• Anaheim, CA 92808 ( 26.5 mi )
• Expert Engineering Tutor

• Male
• Member Since: 04/2012
• Will travel up to 30 miles
• Rates from $39.50 to $49.50 /hr
• On-line In-Home In-Group
• Also Tutors: Environmental Engineering, Civil Engineering

Contact This Tutor View Full Profile

More About This Tutor...

My teaching style has been formulated since I was in college as a Teaching Assistant. I have found that although by following some examples to solve one or two problems may be a quick way to achieve a short term success, however, the students would forget them quickly and when the situations have some minor changes, they may not be able to solve the problem by themselves again. I would like to teach them the theory behind the problems and to make sure that the students have a full understanding of the subject. This is my personal experience. I learned engineering in this way, remembered them, and utilized them in the rest of my life. If you want to be a successful civil engineer, come to me and I will teach you how.
I am a registered professional civil engineer in California and Texas with more than 20 years real world civil engineering experiences. I have M.S. and B.S. degre ... read more

Roger F.

• Dana Point, CA 92629 ( 27.2 mi )
• Engineering Tutor

• Male
• Member Since: 01/2012
• Will travel up to 20 miles
• Rates from $30.00 to $40.00 /hr
• In-Home In-Group
• Also Tutors: Mechanical Engineering, Industrial Engineering, Bio-Medical Engineering, Aerospace Engineering

Contact This Tutor View Full Profile

Solidworks Tutor/Freelance Product Designer/Rapid Modeler

I regularly consult with and train industry leading companies employees for Honda, Addidas, Nokia, John Deere, and Medtronics to name a few on how to better build their prototype models for their unique product applications. I am comfortable teaching one student or a class. I am happy to work as a consultant or a contractor on creating any geometric shape required,
Currenntly I am a 3D Modeling/Prototyping Consultant with the leading manufacturer of additive manufacting hardware. 5 years experience I specialize in product design using Solidworks, 3D CAD Software. I am an expert in the use of the ProJet Line of 3D modeling systems. I have a strong basic knowledge of STL file fixing software and a working knowledge of various prototype model building techniques for industry. I also understand many manufacturing processes and their procedure requirements.

Hamed K.

• Tustin, CA 92782 ( 28.1 mi )
• Engineering Tutor

• Male Age 56
• Member Since: 04/2015
• Will travel up to 30 miles
• Rates from $40.00 to $80.00 /hr
• In-Home In-Group
• Also Tutors: Mechanical Engineering

Contact This Tutor View Full Profile

Read More About Hamed K...

Teaching Mechanical Engineering courses since 2006 in the following universities - UC Irvine - Cal Poly Pomona - CSU Long Beach I have taught Graduate and Undergraduate courses in the area of thermal science and fluid mechanics in the Mechanical Engineering department including Heat Transfer, Fluid mechanics, Energy Management courses.
Interactive Problem Solving Skills

Zaher Y.

• Anaheim, CA 92807 ( 28.8 mi )
• Expert Engineering Tutor

• Male
• Member Since: 07/2012
• Will travel up to 20 miles
• Rates from $35.00 to $140.00 /hr
• On-line In-Home In-Group
• Also Tutors: Civil Engineering

Contact This Tutor View Full Profile

My comments on tutoring Engineering : Calculus I, II & III, Algebra, Differential Equations, Physics, Chemistry.

Over 15 years of experience in the Geotechnical Engineering (Civil Engineering)design and professional work. Experience includes all aspects of Geotechnical Engineering Design, construction materials testing, and geo-environmental engineering. Projects varies from small to large essential/critical structures, highways, airports, harbors, investigative & research projects etc... Place of practice is California and Canada.
Ability to relate complex engineering theory to real world engineering design problems. Ability to translate complex mathematical theory to common sense and real world logic.

Douglas T.

• Valley Center, CA 92082 ( 29 mi )
• Engineering Tutor

• Male Age 61
• Member Since: 10/2015
• Will travel up to 50 miles
• Rates from $35.00 to $45.00 /hr
• On-line In-Group
• Also Tutors: Mechanical Engineering, Materials Engineering

Contact This Tutor View Full Profile

Engineer with Nuclear, Mechanical. Electronics and Materials

I have over 35 years experience in Nuclear Power Engineering, Electronics, Electricity, Mechanical Engineering, Materials and Metallurgy. I am certified in Electrical and Plumbing Services along with HVAC certification. Worked in Design, Manufacturing and Facilities Maintenance Areas. Operated my own firm for over 12 years
Book and Paper. Can tutor via written format

Dennis D.

• La Verne, CA 91750 ( 37 mi )
• Engineering Tutor

• Male
• Member Since: 11/2011
• Will travel up to 20 miles
• Rates from $20.00 to $35.00 /hr
• In-Home In-Group
• Also Tutors: Civil Engineering

Contact This Tutor View Full Profile

Excelent Experience in Math and Civil Engineering

A seasoned civil and structural engineer in both the public and private sector. Civil engineering experience in land development, public works infrastructure, street, sewer, water, storm drains, hydrology, hydraulics, grading, drainage, site development, utilities, survey, subdivision maps, legal descriptions, traffic engineering. Structural engineering analysis and design in steel, concrete, masonry, wood, foundations, soil, seismic and wind design, building code requirements.
I teach a practical approach, what and why you need to learn this and how you will use it later in your career. I'll give you a little background of the history and theory of the subject and tell you about tricks of the trade. I'll also give you advise about how to study effectively and prepare for tests.