Idrees H.

• Reseda, CA 91335 ( 10.8 mi )
• Expert Mechanical Engineering Tutor

• Male
• Member since: 04/2013
• Will travel up to 20 miles
• Rates from $25 to $39 /hr
• On-line In-Home
• Also Tutors: Engineering

Contact this Tutor View Full Profile

Mechanical Engineering is one of my top subjects!

My approach relies on developing the ability of the student to "store" the fundamentals of the subject (without projecting much of my own style of problem solving techniques). In other words, I equip my students with the tools, while at the same time help them discover their ability to be creative and efficient in using these tools. Having been trained in a French system during high school years, I know very well how to deter the fear from seemingly complex subjects, or seemingly too much information.
During my training at Union University, I was hired in the Hundley Center as a Tutor in Math, Physics, and Engineering subjects. Through tout my experience in tutoring inside and outside Union (private home tutoring) I was successful in bringing my students grades from C to A in just few sessions. I enjoyed assisting others in better understanding scientific subjects. Almost all my st ... read more

Deepanshu G.

• Los angeles, CA 90001 ( 29.8 mi )
• Mechanical Engineering Tutor

• Male Age 33
• Member Since: 01/2018
• Will travel up to 50 miles
• Rates from $25.00 to $40.00 /hr
• I am a Certified Teacher
• On-line
• Also Tutors: Environmental Engineering, Civil Engineering

Contact This Tutor View Full Profile

Need help for assignment and homework please contact.

I believe in conceptual knowledge of student to built up a base. You can ask me any queries anytime.
Worked as structural designer for LnT construction( year 2015-17) Freelancer designer since 2015 till now. Designing of roof truss profile, loads calculation of building, assist students in there assignment, seismic calculation of building Prepared students for maths and science Olympiad in college level. Working for government organisation MCD as structural engineer (2017- till now)

mina g.

• Reseda, CA 91335 ( 10.8 mi )
• Mechanical Engineering Tutor

• Male
• Member Since: 11/2015
• Will travel up to 20 miles
• Rates from $15.00 to $40.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

More About This Tutor...

I am a highly motivated Mechanical Engineer with a Bachelor of aeronautical engineering. I have developed key project management skills and the ability to improve communication with the broader project team. As I am required to ensure risk assessments are correctly implemented and current legislative and environmental guidelines are followed, successful communication is critical to my role. I have a thorough knowledge of HVAC, reverse osmosis systems, Automotive and I am experienced in directing and managing the on-site team, including contractors. I possess excellent interpersonal and communication skills and my multitasking abilities are advanced. Given my experience I hope to have the opportunity to work with you

Navid L.

• Reseda, CA 91335 ( 10.8 mi )
• Mechanical Engineering Tutor

• Male Age 45
• Member Since: 11/2011
• Will travel up to 15 miles
• Rates from $36.00 to $106.00 /hr
• On-line In-Home In-Group
• Also Tutors: Environmental Engineering, Engineering, Materials Engineering, Civil Engineering, Aerospace Engineering

Contact This Tutor View Full Profile

More About This Tutor...

solving sample problems ,and home works
WORKED AS A FULL TIME STRUCTURAL ENGINEER UNDER A S.E. (REGISTERED STRUCTURAL ENGINEER) IN RESIDENTIAL AND COMMERCIAL PROJECTS SUCH AS HOSPITALS, AIRPORTS, HOTELS, OFFICE BUILDINGS, PARKING STRUCTURES, CONDOMINIUMS, AND CUSTOM HOMES. RESPONSIBILITIES INCLUDE DESIGN AND ANALYSIS OF VARIOUS STRUCTURAL ELEMENTS FOR GRAVITY, SEISMIC AND WIND LOADS USING BOTH LOAD AND RESISTANCE FACTOR DESIGN (LRFD) AND ALLOWABLE STRESS DESIGN (ASD) PER 2007-CBC. PREPARATION OF STRUCTURAL CALCULATION FOR BEAMS, COLUMNS, CONCRETE DECKS, SHEAR WALLS, RIGID FRAMES, RETAINING WALLS, RAISED AND SLAB FOUNDATIONS,mat footing design ,tenant improvement commercial building design and steel storage tank design, SHORING (SOLDIER PILES INCLUDING TIEBACKS & PIPE RAKERS ), AND MISC. STRUCTURAL ELEMENTS ALONG WITH PREPARATION OF CAD STRUCTURAL DRAWINGS FOR FOUNDATION PLAN, FRAMI ... read more

Daniel F.

• Woodland Hills, CA 91367 ( 11.6 mi )
• Mechanical Engineering Tutor

• Male Age 34
• Member Since: 01/2015
• Will travel up to 20 miles
• Rates from $60.00 to $150.00 /hr
• On-line In-Home In-Group
• Also Tutors: Aerospace Engineering

Contact This Tutor View Full Profile

UCLA: Math/Science/Computers/Executive Functions

I'm a graduate of UCLA Engineering with a passion for explaining how the physical world works through math and physics along with 14 years of tutoring experience in those subjects, test prep, and mentorship programs. The teaching strategy I believe in emphasizes subject fundamentals, a powerful and necessary tool for higher problem solving. This strategy has proven very effective regardless of the student's educational background or mental ability. Besides being knowledgeable, I am motivating, caring, and patient in guiding your student to academic success! EXECUTIVE FUNCTIONING: Executive Functioning is a separate realm that tutoring can assist in. It deals with cognitive processes including organization, time management, and study skills. Much of the difficulty students face in academic subjects can be attributed to the lack of executive functioning. They either cannot keep up w ... read more

DONALD D.

• Thousand Oaks, CA 91360 ( 15.8 mi )
• Mechanical Engineering Tutor

• Male
• Member Since: 11/2012
• Will travel up to 20 miles
• Rates from $35.00 to $55.00 /hr
• I am a Certified Teacher
• In-Group
• Also Tutors: Industrial Engineering, Civil Engineering, Aerospace Engineering

Contact This Tutor View Full Profile

Read More About DONALD D...

1. Teaching Associate at University of Florida while earning Ph.D in Mechanical Engineering and Applied Physics. 2. Assistant Professor at University of North Carolina - Charlotte, Systems Analysis & Design,Rotodynamics, Environmental Control. 3. Joined Rockwell International to assist with Space Shuttle design and performance problems. Program Manager of Mechanical Energy Storage and High Performance Pump Systems.

Dr. John L.

• Beverly Hills, CA 90210 ( 18.7 mi )
• Expert Mechanical Engineering Tutor

• Male
• Member Since: 08/2019
• Will travel up to 50 miles
• Tutoring Rate: $150.00 /hr
• On-line In-Group
• Also Tutors: Environmental Engineering, Engineering, Materials Engineering, Industrial Engineering, Electrical Engineering, Civil Engineering, Chemical Engineering, Bio-Medical Engineering, Aerospace Engineering

Contact This Tutor View Full Profile

Mechanical Engineering is one of my top subjects!

Rod has over a decade of teaching experience as a Lecturer at Oxford University, teaching Mathematics/Physics/Engineering to 1st and 2nd year Undergraduates, and where he obtained his PhD (D.Phil) and conducted several years’ research in the field of jet/rocket propulsion. Rod also has two decades experience as a private tutor, teaching Engineering, Physics and Mathematics to students from the Universities of Cambridge, Oxford, Imperial College London, University College London, Boston, Queen Mary University of London, Loughborough, London School of Economics, New College of the Humanities, Southampton, Nottingham, Warwick, Liverpool, Oxford Brookes, London City, Derby, and others, at both undergraduate and masters level. Rod also has experience teaching industrial professionals and students at all pre-University levels from GCSE to IB, including UK, European and USA curriculums. ... read more

Artin H.

• Montrose, CA 91020 ( 20.7 mi )
• Mechanical Engineering Tutor

• Male Age 38
• Member Since: 09/2015
• Will travel up to 15 miles
• Rates from $30.00 to $40.00 /hr
• In-Home In-Group

Contact This Tutor View Full Profile

A Little Bit About Me...

Graduated from number "1" engineering university in Iran (Sharif University of Technology, among top 150 World Universities) with total GPA 3.9/4.0, I have a solid background in Mechanical Engineering and am honored to have the opportunity to share my knowledge with high school, college and university students to help them build and develop their academic foundation as well. I have experience teaching a number of college students in my home country, helping them prepare themselves for university entrance exam.

Isaac G.

• Los Angeles, CA 90065 ( 24.2 mi )
• Experienced Mechanical Engineering Tutor

• Male Age 31
• Member Since: 07/2013
• Will travel up to 20 miles
• Rates from $15.00 to $25.00 /hr
• On-line In-Home In-Group
• Also Tutors: Civil Engineering

Contact This Tutor View Full Profile

My comments on tutoring Mechanical Engineering : At UCSD we take several classes that are very alike to the curriculum of a mechanical Engineer.

I can teach either one to one or multiple kids. I have dealt with both cases and I when I am dealing with multiple kids I try to pair them up by their struggles so that they can overcome the obstacle together. I try to focus on what my pupil are struggling on and go over that with more detail then that of the stuff they already know. I teach the material at a pace that is right for everyone but I slow down if anyone needs me too.
I started tutoring in middle school in the field of math, science and history. When I was in High School I tutored kids for the clubs I was in such as the Spanish Honors Society, Math Club, National Honors Society, and California Scholarship Federation. On top of tutoring kids at my high school I would tutor elementary kids that were taking the high school placement exam on weekends at my high school. Now that I am in college I work in teams of 4 or 5 to h ... read more

Mehrab J.

• Arcadia, CA 91007 ( 30.8 mi )
• Expert Mechanical Engineering Tutor

• Male Age 57
• Member Since: 05/2013
• Will travel up to 30 miles
• Rates from $50.00 to $100.00 /hr
• In-Home In-Group
• Also Tutors: Civil Engineering

Contact This Tutor View Full Profile

My comments on tutoring Mechanical Engineering : Over 17 years of experience in the Geotechnical Engineering (Civil Engineering)teaching, research, analysis, design and professional work. Experience includes all aspects of Geotechnical Engineering Analysis and Design, construction materials testing and soil dynamics . Projects varies from small to large essential/critical structures, highways, airports, harbors, tall buildings, investigative & research projects etc... Place of practice is IRAN and California, USA. Ability to relate complex engineering theory to real world engineering design problems. Ability to translate complex mathematical theory to common sense and real world logic. My top subjects are: Soil Mechanics, Foundation Engineering, Advanced Soil Mechanics, Advanced Foundation Engineering, Statics, Strength of Materials

TEACHING ASSIGNMENT Graduate Courses: Rock Mechanics, Soil Dynamics, Marine Geotechnics, Numerical Methods in Geotechnical Engineering, Advanced Soil Mechanics, Advanced Foundation Engineering, Advanced Engineering Mathematics. Under Graduate Courses: Soil Mechanics and Lab, Foundation Engineering, Ground Water Engineering, Dam Engineering, Strength of Materials and Lab. THESIS ADVISOR Advisory and supervision of more than 55 students in their master degree thesis which led to publish a lot of valuable papers in journals and also in conferences.
So responsible, work on the whole and detailed concepts, make relation between theories and actual cases, which can makes the most difficult concepts to be understood easily.

Daren P.

• Redondo Beach, CA 90278 ( 32 mi )
• Mechanical Engineering Tutor

• Male Age 57
• Member Since: 01/2016
• Will travel up to 20 miles
• Rates from $18.00 to $30.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

Read More About Daren P...

BAS Mechanical engineering 3 yrs engineering experience at Nortthrop Grumman including: 1. 3D modeling in Pro E, and Catia for the F35 program 2. Project Management on the F18 line which has taken me to Japan and China for supplier audits 8 Years of experience with Sanyo Denki as a design engineer and new product introduction management

Amirali M.

• Reseda, CA 91335 ( 10.1 mi )
• Mechanical Engineering Tutor

• Male
• Member Since: 01/2011
• Will travel up to 30 miles
• Rates from $51.00 to $64.00 /hr

Contact This Tutor View Full Profile

More About This Tutor...

I believe that everyone is capable of learning anything. I encourage my students to learn by showing and strengthening their hidden capability they possess but somehow has been oppressed or not developed during their educational life. Everybody has the answer inside. We as teachers just need to show them this reality.
Since 2006 I have been teaching and tutoring students in mathematics and physics. First I was introduced to my university tutoring center by my instructor. Then I expanded my career by tutoring in a community college and also one-on-one tutoring.

Prathap A.

• N HOLLYWOOD, CA 91605 ( 14.2 mi )
• Mechanical Engineering Tutor

• Male
• Member Since: 07/2010
• Will travel up to 15 miles
• Rates from $47.00 to $59.00 /hr
• I am a Certified Teacher

Contact This Tutor View Full Profile

A Little Bit About Me...

Being a Mechanical Engineering graduate,I am fully confident that a high level of excellence can be acquired in math education. I have gained practical experience in Computer Aided Design and Manufacturing of aircraft components, which has enabled me to gain an thorough understanding in many areas of math and science. In addition, I have learned extensive grammatical skills due to preparing project reports and technical documents. During the last eight years I have tutored students in mathematics, and sciences.
I am fond of working with children and edifying them. I believe all children can learn, but each in different ways. I am available to help your child find academic success. I am patient, resourceful, and considerate. My objective is to provide quality education possible. I am a firm believer in teaching through discovery together with observation and in providing a pract ... read more

Vera D.

• Alhambra, CA 91801 ( 29.4 mi )
• Mechanical Engineering Tutor

• Female
• Member Since: 04/2011
• Will travel up to 10 miles
• Rates from $64.00 to $72.00 /hr
• Also Tutors: Aerospace Engineering

Contact This Tutor View Full Profile

A Little Bit About Me...

I enjoy teaching. My approach to teaching is to be interactive as possible. I believe with a combination of hard work and determination, one is fully capable of learning. I am flexible and willing to adjust one teaching style based on the student needs.
I am currently living in Ottawa, Canada but intend to return to the United States after I complete my Master's degree in International Development and Global Studies. I will also be in California for my summer break which is from Mid-April to the end of August. My current research concerns policies and institutional infrastructure for water management. I have a wide range of experience from international trade at the U.S. Department of Commerce to quality assurance and engineering at the Department of Defense. Furthermore, I have a B.Sc. in Business Administration. I spent a large portion in high school and my years as an undergrad ... read more

Robert R.

• Port Hueneme, CA 93041 ( 30.6 mi )
• Mechanical Engineering Tutor

• Male
• Member Since: 08/2009
• Will travel up to 20 miles
• Rates from $45.00 to $56.00 /hr
• I am a Certified Teacher
• Also Tutors: Materials Engineering

Contact This Tutor View Full Profile

Read More About Robert R...

I love teaching children, young adults and adults alike. I believe everyone can learn when he or she is ready to learn, focused, motivated, and properly guided through the necessary building blocks. I am patient, considerate, professional, and respectful. My goal is to provide the best learning experience possible. My method is to tell, show, try, do, review, test and evaluate. Learning is discovering and changing behavior. I believe all students can meet their potential if they are given the appropriate surroundings and positive learning experiences.
I have a broad experience base in many areas including that of: corporate vice president, White House and Congressional liaison, program manager, professional engineer, nuclear submarine officer, assistant professor, and airline pilot. I have earned two advanced degrees, MS in Mechanical Engineering and Business Administration, which ... read more