CAD Tutors & Teachers for Lessons, Instruction or Help in Pinon Hills, CA

Medi-Cal Biller 02/2014 - 05/2015 & 09/2015 – Present Owl Western pharmacy o Create and maintain a new ways to save money and reduce the cost. o Solve any problem to enhance the performance of the pharmacy. o Create very good relations with the customers. o Updating the statues of the patients in the facilities. o Adding the insurances for the patients & bill them. o Make priors authorizations for the rejected claims. Project Engineer 05/2014 - 09/2015 Electracorp, Inc. o Managing, editing and adding all the drawing by "Bluebeam Revu CAD" o Reading all the cut sheets from the vendors, creating the submittals. o Create the RFI's "Request for Information", Submittals, Releases, etc and sent it to the General Contractor. o Create the BOM "Bill of Materials", a material release logs. o Follow up the RFI's, Submittals, Releases, etc and maintain a log for every single thing. o Cr

$ 30.00

average per hour

($25.00-$35.00)

Range

Have 30000 hours of CAD, solidworks, solid edge, AutoCAD, solidworks simulation, pro Engineer, Catia, etc, etc.. Have done CAD in many industries. Have taught CAD previously at General Atomics. Also familiar with FEA, linear and nonlinear simulation. Can also teach solidworks simulation, possibly various other softwares including other simulation packages, other FEA software (nastran for windows). Generally one on one hands on but can teach groups.

$ 47.50

average per hour

($35.00-$60.00)

Range

I finished my masteral degree on special education and education units from De La Salle University, Manila and have been teaching for the past eight years at Xavier School Greenhills. Four years in preparatory school then/and currently with the English Department teaching fifth graders. As a teacher I am committed to the development of effective ways to teach reading and writing to children with or without special needs. For the past three school years I have been asked to train grade school teachers on the Zaner-Bloser penmanship style. Outside school, I had conducted research and created an individualized penmanship program for students with ADHD. I was also a breakout speaker for Frontiers and Innovations in Teaching in 2014 where I discussed about exploring sites and various applications to empower students in Digital Storytelling. The next year, 2015, I was also invited to be a s

$ 22.50

average per hour

($15.00-$30.00)

Range

Graduated from Interior Designers Institute in Newport Beach, CA. I have many years of experience; working with Sketchup, CAD, & Vray. I am patient with my students and love to help them bring their projects to life. My work consists of Residential & Commercial contracts/ build. Contact me at erikahanan@gmail.com for a chat. I use a 3 button mouse & a MAC, Sketchup 2019, everyone has different ways of learning and I will adjust my lesson and my students ability. I will teach you the basics of Sketchup, however, if you have a project that you are working on and need help completing it, please let me know and we can work on your project to completion. Please email me at : erikahanan@gmail.com to discuss teaching options. Available for freelance Sketchup/ Vray / Interior Design Projects. Please message me at: erikahanan@gmail.com to discuss your project.

$ 57.50

average per hour

($55.00-$60.00)

Range

I got more than 10 years giving tutoring classes. IMPORTANT thing is commitment, I don't give classes to student who are not serious with study. its no about explain me this or that, its about fix your background so you are able to start studding new stuff by yourself without help, only help to make clear specific topics. of course if you need help in specific topics I am going to help you. Thanks JAIME PUIG PUIG.JAIME@GMAIL.COM https://www.linkedin.com/in/jaime-puig-00b93548 QUALIFICATIONS ? 5+ years of experience as a quality control inspector. ? 3+ year in the aerospace industry ? 3+ AutoCAD user ? Knowledge in ASME (GD&T), ASTM, ISO 9000, and others standards. ? Ability to understanding and interpreted blueprints. ? Excellent Computer skill (MS Office, AutoCAD, SolidWorks, Master CAM, MS Project, etc.) ? Training developed aptitude. ? Possesses a strong work ethic

$ 30.00

average per hour

($25.00-$35.00)

Range

AutoCAD, Civil, 20 plus years experience in CAD Land Surveying Data to CAD Civil Engineering-Maps (Base Maps, Topo, Construction, Grading, Contours, Sub-Divisions, ALTA, Landscaping) Architectural and Landscape Plans Shop Drawings P&ID Learn how to read Blueprints and create CAD drawings from scratch! How to organize files and keep layers clean.... Open Mentor

$ 37.50

average per hour

($25.00-$50.00)

Range

i show you what you need to know as you work on your laptop or desktop. i have worked in both fields for many years. in drafting i in almost every type of engineering there is, Three of which in HVAC Drafting and Jr Design. as a Graphic Designer i also have a wide verity of experience from screen printing set up i also have experience in printing set up and digital set up as in for web use.

$ 29.50

average per hour

($20.00-$39.00)

Range

Dear Student, Hi. I am a Math, Statistics & Business Finance tutor and have been tutoring these two and other subjects for last 20 years. I did masters in Math from Lucknow University India in 1983 and then again another Masters from Canada ( University of Western Ontario ) in Statistics 1n 1989. I had physics, chemistry as minor subjects during undergrad. I have always been an A+ student and also was recommended for Gold Medal in Canada when I was doing Masters. During 1989-90 I also taught several undergraduate math & stats class as a sub when my professors were on leave. I also tutored math & statistics other college students when I was studying at University of Western Ontario. In 1991, I started working as a statistician at Addiction Research Foundation in Toronto. I worked there for 10 years and during that time I continuously tutored University of Toronto Studen

$ 37.50

average per hour

($25.00-$50.00)

Range

I use a very interactive teaching style based on the student's needs, I am very flexible and usually use a wide range of techniques for getting the best results. I have an experience of about 6 years in using Sketchup and other CAD softwear. I am mainly specialized in using CAD for architectural design, but I also used if for product design as also. I am very familiarized with the extensions that Sketchup uses. I published several paper which concern the use of CAD technology for preserving architectural heritage.

$ 17.50

average per hour

($15.00-$20.00)

Range

Rod has over a decade of teaching experience as a Lecturer at Oxford University, teaching Mathematics/Physics/Engineering to 1st and 2nd year Undergraduates, and where he obtained his PhD (D.Phil) and conducted several years’ research in the field of jet/rocket propulsion. Rod also has two decades experience as a private tutor, teaching Engineering, Physics and Mathematics to students from the Universities of Cambridge, Oxford, Imperial College London, University College London, Boston, Queen Mary University of London, Loughborough, London School of Economics, New College of the Humanities, Southampton, Nottingham, Warwick, Liverpool, Oxford Brookes, London City, Derby, and others, at both undergraduate and masters level. Rod also has experience teaching industrial professionals and students at all pre-University levels from GCSE to IB, including UK, European and USA curriculums.

$ 150.00

per hour

I was a dedicated student throughout high school and college. I earned my Bachelor's in Electrical Engineering from Drexel University. I know work as a systems engineer performing mission analysis on guidance, navigation, and control aspects of rocket systems. I also mentor a FIRST robotics high school team. In 6 weeks we design and manufacture a robot to play a unique game set out each year. Through this experience I have a strong educational background and first hand mentoring experience.

$ 25.00

average per hour

($20.00-$30.00)

Range

since 2003 fully skilled in computer hardware and software, fluent in the English language cons for writing, reading and prons for speaking, Iprovide real time solutions for my students, aand give set of lectures before he start of the tutorial. I am organized and give exact and compplete details with the entire tutorial lessons. Send me an email at mathew_nuevo@yahoo.com,I will be glad to help you with complete support, fair and equal. basics, lectures, hands on practice, actual application

$ 75.00

average per hour

($50.00-$100.00)

Range

Results-oriented, hands-on professional with 19 years of drafting experience. Verifiable track record for the completion of multi-million dollar projects through coordinating trades, developing partnerships, and building positive rapport with architects, engineers, local officials, vendors, and clients while maintaining costs. Versed in as-built surveying, contract negotiations, project estimating, impending design problems, document preparation, material purchasing and construction management. My teaching style depends on the student. The student's goals and timeframe will dictate my strategy to accomplish the student's objectives.

$ 35.00

average per hour

($30.00-$40.00)

Range

• Expert skill in AutoCAD Plant 3D 2013, AutoCAD 2015, CADWorx 2013 Production Modeling • CAD Data Files Management, Autodesk Inc., 2013 • AutoCAD Certified, Lee Learning Center • CADWorx Certified, COADE • Caesar II Certification in Piping Stress Analysis, Lee Learning Center, 2010 • PDMS Certified, Houston Community College

$ 35.00

average per hour

($30.00-$40.00)

Range