dennis c.

• Houston, TX 77067 ( 28.3 mi )
• Experienced CAD Tutor

• Male Age 68
• Member since: 09/2015
• Will travel up to 30 miles
• Rates from $35 to $45 /hr
• In-Group
• Also Tutors: CAD

Contact this Tutor View Full Profile

My comments on tutoring CAD : 30+years exp. in microstation 2d 20+years exp. in autocad 2d

hands on (show by example)
30+ years experience in microstation 2d (Transportation,petrochemical,etc...) Levels,file manipupation 20+ years experience in autocad 2d (Transportation,petrochemical,etc...) Layers,file manipulation 40+ years experience overall experience in drafting and design (architectural,piping,structural,mechanical,etc..) view projection,sections,detailing,

Marco a.

• Houston, TX 77086 ( 29.1 mi )
• CAD Tutor

• Male Age 48
• Member Since: 02/2015
• Will travel up to 40 miles
• Rates from $22.00 to $33.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

Design & Drafter

I have 4 years experience, and also have an Associates degree in CADD (Computer Aided Drafting & Design). During my career, I also found that knowing Project Management and Design experience that also helps in CAD. I have worked with the following programs; AutoCAD 2013, 2014, 2015, 3D, Revit, Inventor, 3DS Max, Maya, SolidEdge, and SolidWorks.
Hands on practice and explanation of the process. Direct and truthful teaching style.

Paul B.

• Montgomery, TX 77356 ( 4.2 mi )
• Expert CAD Tutor

• Male Age 51
• Member Since: 05/2012
• Will travel up to 50 miles
• Rates from $30.00 to $50.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

CAD is one of my top subjects! Autodesk Autocad and Inventor Trainer from 2005-2007 with recognized autodesk training center. Currently a CAD Design Manager for subsea/mechanical company. Also expert in Solidworks.

Over fifteen years experience in the engineering and design industry. Designed & developed subsea equipment, implant devices, process piping packages, mass transfer equipment, directional drilling tooling, sports medicine products, gages, fixtures and other precision instruments. Currently a CAD Design Manager for Subsea installation Company, Working on several projects involving spool installation, intervention panel design & install, hydropower turbines, direction drilling MWD calibration stands, plet frames & SUTA frame supports for umbilical reel. From 2005-2007 was a trainer for Autodesk AutoCAD 2006, 2007 & 2008 and Autodesk Inventor; Developed course curriculum for Autodesk Inventor & 3D Studio Max; Also an Instructor for Mechanical Drawings & Detailing, Piping Drawings and Detailing, Plant Equipment which consist of Geometric Tolerancing & Dimensioning, P&ID’s, ISO’s, GA’s, ... read more

Bryam R.

• Spring, TX 77386 ( 21.9 mi )
• Experienced CAD Tutor

• Male Age 37
• Member Since: 05/2015
• Will travel up to 20 miles
• Rates from $30.00 to $50.00 /hr
• On-line In-Home

Contact This Tutor View Full Profile

Solidworks Drafter/Designer

Worked for gear company. Making drawings and designs for adapters, flanges, extensions and more. Gears are used in valves for use in the energy, food, and oil industry. Currently employed at NOV solids control department making drawings and designs for skids for all solid control systems including gumbo boxes, shakers, mud coolers, etc.

Dale S.

• Houston, TX 77068 ( 24.5 mi )
• CAD Tutor

• Male
• Member Since: 01/2014
• Will travel up to 20 miles
• Rates from $32.00 to $36.00 /hr
• In-Home In-Group
• Also Tutors: Computer Programming, Microsoft PowerPoint, Computer, VB.net, HTML, Microsoft Office, Desktop Publishing

Contact This Tutor View Full Profile

Learn Computer Basics with this instructor.

One on one, whiteboard illustration, use analogy in story telling to drive home a point.
• Remove and Install CPU’s, SECC processors, PGA processor, Motherboard Form Factors and Components, Motherboard from a computer case, Configuring BIOS, CMOS, and Boot Sequence, Configure and Troubleshoot Power Management Features, Configure, Optimize, and Troubleshoot Laptops. • Install and Remove RAM, a Floppy Drive and Second IDE Hard Drive, Managing Disk, Partitions, and Files, Identifying and Installing Computer Devices and Drivers. • Install and Configure Video Displays, Troubleshooting Hardware, Printers, and Laptops. • Install, Configure, Optimize and Upgrade Storage Devices, Preventative Maintenance and Safety, Resolving Printer Problems. • Troubleshooting Error Messages and Perform System Recovery. • Network Installation and Troubleshooting, Install, Configure, Optimize, Upgrad ... read more

Fred W.

• Cypress, TX 77433 ( 25.4 mi )
• CAD Tutor

• Male Age 50
• Member Since: 09/2012
• Will travel up to 50 miles
• Rates from $34.00 to $50.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

A Little Bit About Me...

15 years experience drafting and designing floor plan layouts, one-line diagram, schematics for electrical contractors and global telecom company. Created and mangaged large database and project managed large scale fiber optical equipment implementation. Also experience with mechanical drafting although rarely used.

Brandon M.

• Houston, TX 77067 ( 28.3 mi )
• Expert CAD Tutor

• Male Age 38
• Member Since: 06/2012
• Will travel up to 20 miles
• Rates from $20.00 to $40.00 /hr
• In-Home In-Group
• Also Tutors: Microsoft PowerPoint, Microsoft Office, Graphic Design, SketchUp

Contact This Tutor View Full Profile

More About This Tutor...

I as design tutor I'm very hands on. I'll usually start by showing how it's done than allow the learning to mimic my actions.
My name is Brandon Moss I'm a graduate from the Art Institute of Houston with a bachelor's degree in Design & Technical Graphics, and an associates degree in graphic design. With my experience in CAD and Design I'm concern to be an asset to your company. I've been using Autocad for five years and am efficient at both the 2D and 3D aspects of the software. I also have experience with BIM software such as Plant 3D and P&ID as well experience in Revit. I also have eight years experience in graphic design using using photoshop, illustrator, and indesign.

Gwenaelle M.

• Spring, TX 77373 ( 23.7 mi )
• CAD Tutor

• Female
• Member Since: 10/2010
• Will travel up to 10 miles
• Rates from $43.00 to $50.00 /hr
• Also Tutors: Javascript, HTML, C++, ASP.NET, Microsoft Office, Graphic Design, Microsoft Excel, Desktop Publishing, Microsoft Access

Contact This Tutor View Full Profile

Read More About Gwenaelle M...

I would describe myself as a very patient and understanding person. I always make sure that the student understand the concept and is comfortable with the explanations given to him/her before continuing with the problem. Being successful in tutoring, is realizing that the student is able to complete a problem on his/her own without my help.
I earned two bachelors degrees from LSU: one in Mathematics and one in Computer Sciences. But I would be more interested in tutoring FRENCH. I am a native FRENCH speaker and I've been in the country for over 20 years. I go back to France every summer to visit my family and would like to share my experience and teach the languague to students in the Spring, TX area. I've also been a tutor for the past 8 years at Tutor.com and tutor Elementary math, Middle school math and Algebra.