Gianna G.

• Montclair, CA 91763 ( 21.8 mi )
• CAD Tutor

• Female
• Member since: 01/2016
• Will travel up to 20 miles
• Rates from $15 to $30 /hr
• I am a Certified Teacher
• On-line In-Home In-Group
• Also Tutors: SketchUp

Contact this Tutor View Full Profile

More About This Tutor...

One of my strongest suit as a teacher is to integrate technology in teaching.
I finished my masteral degree on special education and education units from De La Salle University, Manila and have been teaching for the past eight years at Xavier School Greenhills. Four years in preparatory school then/and currently with the English Department teaching fifth graders. As a teacher I am committed to the development of effective ways to teach reading and writing to children with or without special needs. For the past three school years I have been asked to train grade school teachers on the Zaner-Bloser penmanship style. Outside school, I had conducted research and created an individualized penmanship program for students with ADHD. I was also a breakout speaker for Frontiers and Innovations in Teaching in 2014 where I discussed about exploring sites and various applications to empower ... read more

Iulian M.

• Los Angeles, CA 90001 ( 31.9 mi )
• CAD Tutor

• Male Age 31
• Member Since: 01/2017
• Will travel up to 20 miles
• Rates from $15.00 to $20.00 /hr
• On-line
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

6 years of experience of using CAD software

I use a very interactive teaching style based on the student's needs, I am very flexible and usually use a wide range of techniques for getting the best results.
I have an experience of about 6 years in using Sketchup and other CAD softwear. I am mainly specialized in using CAD for architectural design, but I also used if for product design as also. I am very familiarized with the extensions that Sketchup uses. I published several paper which concern the use of CAD technology for preserving architectural heritage.

Brian E.

• Anaheim, CA 92807 ( 10.3 mi )
• Experienced CAD Tutor

• Male
• Member Since: 03/2012
• Will travel up to 20 miles
• Rates from $25.00 to $50.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

My comments on tutoring CAD : AutoCAD, Civil,

Open Mentor
20 plus years experience in CAD Land Surveying Data to CAD Civil Engineering-Maps (Base Maps, Topo, Construction, Grading, Contours, Sub-Divisions, ALTA, Landscaping) Architectural and Landscape Plans Shop Drawings P&ID Learn how to read Blueprints and create CAD drawings from scratch! How to organize files and keep layers clean....

Rod P.

• Newport Beach, CA 92660 ( 10.7 mi )
• CAD Tutor

• Male
• Member Since: 11/2011
• Will travel up to 20 miles
• Tutoring Rate: $40.00 /hr
• I am a Certified Teacher
• On-line In-Home

Contact This Tutor View Full Profile

More About This Tutor...

20 years CAD experience. Familiar with AutoCAD, Drafix, VersaCAD, Solidworks, Revit, Cadkey and Sketchup. I have experience in architectural, mechanical and electrical design. 20 years ago I started off doing CAD/CAM and have learned every style since. I've taught other employees at nearly every company I've been employed at.
I have been able to teach AutoCAD to the basic beginner up to the 20 year veteran.

Jerome M.

• Costa Mesa, CA 92626 ( 11.5 mi )
• Expert CAD Tutor

• Male Age 66
• Member Since: 11/2011
• Will travel up to 20 miles
• Rates from $30.00 to $50.00 /hr
• On-line
• Also Tutors: HTML, Microsoft Excel

Contact This Tutor View Full Profile

My comments on tutoring CAD : AutoCad and MicroStation 2D

Online
Eighteen years of Cadd drafting experience to lend my expertise to students looking to grow. I'm versatility in the drafting of mechanical, HVAC, electrical, architectural, civil, and structural design utilizing 2D Microstation and AutoCad software's. Able to work online and take individual steps with you. Can also give HTML and VB steps.

Roger F.

• Dana Point, CA 92629 ( 14 mi )
• CAD Tutor

• Male
• Member Since: 01/2012
• Will travel up to 20 miles
• Rates from $30.00 to $40.00 /hr
• In-Home In-Group
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

Solidworks Tutor/Freelance Product Designer/Rapid Modeler

Currenntly I am a 3D Modeling/Prototyping Consultant with the leading manufacturer of additive manufacting hardware. 5 years experience I specialize in product design using Solidworks, 3D CAD Software. I am an expert in the use of the ProJet Line of 3D modeling systems. I have a strong basic knowledge of STL file fixing software and a working knowledge of various prototype model building techniques for industry. I also understand many manufacturing processes and their procedure requirements.
I regularly consult with and train industry leading companies employees for Honda, Addidas, Nokia, John Deere, and Medtronics to name a few on how to better build their prototype models for their unique product applications. I am comfortable teaching one student or a class. I am happy to work as a consultant or a contractor on creating any geometric shape required,

Ramez E.

• Rancho Cucamonga, CA 91730 ( 23.8 mi )
• CAD Tutor

• Male Age 39
• Member Since: 11/2015
• Will travel up to 20 miles
• Rates from $25.00 to $35.00 /hr
• On-line In-Home In-Group
• Also Tutors: Microsoft PowerPoint, Computer, Microsoft Office, Microsoft Excel

Contact This Tutor View Full Profile

More About This Tutor...

Medi-Cal Biller 02/2014 - 05/2015 & 09/2015 – Present Owl Western pharmacy o Create and maintain a new ways to save money and reduce the cost. o Solve any problem to enhance the performance of the pharmacy. o Create very good relations with the customers. o Updating the statues of the patients in the facilities. o Adding the insurances for the patients & bill them. o Make priors authorizations for the rejected claims. Project Engineer 05/2014 - 09/2015 Electracorp, Inc. o Managing, editing and adding all the drawing by "Bluebeam Revu CAD" o Reading all the cut sheets from the vendors, creating the submittals. o Create the RFI's "Request for Information", Submittals, Releases, etc and sent it to the General Contractor. o Create the BOM "Bill of Materials", a material release logs. o Follow up the RFI's, Submittals, Releases, etc and maintain a log for every single thing. o Cr ... read more

Jerry M.

• Long Beach, CA 90805 ( 26 mi )
• CAD Tutor

• Male
• Member Since: 06/2015
• Will travel up to 50 miles
• Rates from $30.00 to $40.00 /hr
• On-line In-Home In-Group

Contact This Tutor View Full Profile

If

My teaching style depends on the student. The student's goals and timeframe will dictate my strategy to accomplish the student's objectives.
Results-oriented, hands-on professional with 19 years of drafting experience. Verifiable track record for the completion of multi-million dollar projects through coordinating trades, developing partnerships, and building positive rapport with architects, engineers, local officials, vendors, and clients while maintaining costs. Versed in as-built surveying, contract negotiations, project estimating, impending design problems, document preparation, material purchasing and construction management.

Delfin M.

• La Verne, CA 91750 ( 26.7 mi )
• Expert CAD Tutor

• Male
• Member Since: 11/2016
• Will travel up to 10 miles
• Rates from $35.00 to $50.00 /hr

Contact This Tutor View Full Profile

My comments on tutoring CAD : Revit Architecture

I have a degree in Architecture with over 20 years of experience in construction documents and have more than 12 years experience in microstation and autocad and 8 years experience in Revit Architecture. I have set my current company's Revit standards. I am currently training staff fundamentals of Revit Architecture. I will however, am only interested in teaching the fundamentals of Revit Architecture.

Kyle C.

• San Pedro, CA 90731 ( 29 mi )
• CAD Tutor

• Male
• Member Since: 05/2012
• Will travel up to 30 miles
• Rates from $25.00 to $35.00 /hr

Contact This Tutor View Full Profile

More About This Tutor...

I have been using AutoCAD for over 15 years starting from Relase 14.1 up to AutoCAD2012. I have a background in Landscape Architecture and have thought AutoCAD at ITT Tech in Rancho Cardova, CA. I'm very patient and can adapt to any style of teaching from the basics to advance. However I don't tutor on 3D.

BENNY D.

• Carson, CA 90746 ( 29.5 mi )
• CAD Tutor

• Male
• Member Since: 11/2011
• Will travel up to 40 miles
• Rates from $30.00 to $50.00 /hr

Contact This Tutor View Full Profile

More About This Tutor...

I can tailor the subject matter to suit the students' needs, considering what he or she already knew. My approach in tutoring is different to my approach in classroom teaching. In tutoring the TUTEE is always in front of the computer so he or she can apply what I am saying or teaching. In short words it is more hands on since this is COMPUTER-AIDED subject.
I retired from an aerospace company in the area and also just retired from USN Reserve. I was a part time AutoCAD instructor for a couple Vocational Institutes or Colleges. I served under Special Projects, trained Engineers, Architects, Draftspersons, Interior Designers and other professionals in the design trade in the use of CAD Software. I prepared the syllabus and exercises. Researched solutions to problems that were beneficial to the students/trainees. Maintained proficiency with software used. I was an Adjunct Instr ... read more

Frank H.

• Los Angeles, CA 90015 ( 34.8 mi )
• CAD Tutor

• Male Age 50
• Member Since: 07/2013
• Will travel up to 20 miles
• Rates from $20.00 to $39.00 /hr
• On-line In-Home In-Group
• Also Tutors: Computer, Graphic Design, Desktop Publishing

Contact This Tutor View Full Profile

Learn what you like love what you do.

i show you what you need to know as you work on your laptop or desktop.
i have worked in both fields for many years. in drafting i in almost every type of engineering there is, Three of which in HVAC Drafting and Jr Design. as a Graphic Designer i also have a wide verity of experience from screen printing set up i also have experience in printing set up and digital set up as in for web use.

Erika H.

• Los Angeles, CA 90065 ( 35.7 mi )
• CAD Tutor

• Female
• Member Since: 05/2016
• Will travel up to 5 miles
• Rates from $55.00 to $60.00 /hr
• On-line
• Also Tutors: SketchUp

Contact This Tutor View Full Profile

SKETCHUP TUTORING

I use a 3 button mouse & a MAC, Sketchup 2019, everyone has different ways of learning and I will adjust my lesson and my students ability. I will teach you the basics of Sketchup, however, if you have a project that you are working on and need help completing it, please let me know and we can work on your project to completion. Please email me at : erikahanan@gmail.com to discuss teaching options. Available for freelance Sketchup/ Vray / Interior Design Projects. Please message me at: erikahanan@gmail.com to discuss your project.
Graduated from Interior Designers Institute in Newport Beach, CA. I have many years of experience; working with Sketchup, CAD, & Vray. I am patient with my students and love to help them bring their projects to life. My work consists of Residential & Commercial contracts/ build. Contact me at erikahanan@gmail.com for a chat.

June L.

• Riverside, CA 92505 ( 14.4 mi )
• CAD Tutor

• Male
• Member Since: 07/2010
• Will travel up to 15 miles
• Rates from $49.00 to $61.00 /hr
• Also Tutors: Javascript, C++, Microsoft Office, Graphic Design, Microsoft Excel, Desktop Publishing, Microsoft Access

Contact This Tutor View Full Profile

More About This Tutor...

I believe in helping others through mentoring and tutoring. It is a fulfilling experience seeing children achieve their goals and overcoming their difficulties and striving to be a better student. I sincerely believe all children can learn, but some at a different pace. I empathize a child's struggles in school because I was once like that, but with help and guidance anyone can conquer their difficulties . I will do anything in my power to help your child overcome their struggles. I am patient, flexible, and accommodating, and being readily available as a dependable resource for your child.
Graduating from an engineering school gave me the skills of working hard and doing the very best in obtaining personal goals. I have a BS degree in Computer Engineering, which includes a minor in verbal communications. This means I have a deep background in mathematics and analytical concepts, p ... read more

Celeste L.

• Long Beach, CA 90815 ( 22.3 mi )
• CAD Tutor

• Female
• Member Since: 12/2010
• Will travel up to 50 miles
• Rates from $50.00 to $62.00 /hr
• Also Tutors: Microsoft Office, Microsoft Excel, Desktop Publishing, Microsoft Access

Contact This Tutor View Full Profile

More About This Tutor...

I enjoy working with kids (and teenagers), and do so compassionately and patiently. Patience with children is one of my strongest attributes for this position. They find me easy to talk to and relate. This not only enables me to teach them, but also allows us to learn from each other. I believe that children are the future, and each should be given ample opportunity to succeed. It is one of my goals to assist with this. Since graduating, I have felt a great need to give back. I will be a valuable addition to your team.
I graduated from the UCSB with a B.S. in Biochemistry in June, 2010. My willingness to work combined with my academic performance demonstrates my commitment to excellence. My grades are a good indication that I complete tasks with attention to detail and consistent follow through. I have extensive skills from my work in labs and my numerous other courses that are va ... read more