Aerospace Engineering Tutors & Teachers for Lessons, Instruction or Help

I follow the method of G. Polya in his classic work "How to Solve It". By asking the right questions, one can help the student define his problem, form a plan for the solution, carry out the plan, and examine the result. I also try to work as many difficult problems from the student's text as time permits, in order to show that all problems have a solution, and the student can build confidence in attacking any problem. I try to present the material in as many ways as needed, so that I can match the subject to the student's style of learning. I was a senior scientist - engineer for 37 years. I retired to care for my comatose wife at home, and she died a few months later. This situation has left me open to new directions. My teaching experience has been 3 years as a graduate teaching assistant, and 2 years as a tutor to friends and family in science and mathematics. My goal is to sh

$ 38.50

average per hour

($25.00-$52.00)

Range

As a California University of PA graduate, I am highly motivated to make others succeed. I have 12 years of writing experience through short essay, newspaper article, working on a books, wrote over several 20 page economic development projects. I'm a highly motivated individual to help people get to the next level. I have a masters degree in geography. I am working on another masters degree in business administration. I have an ITA a tutoring certification to tutor kids from k-12 and college level from Associates to Phd. I have helped others for a period of 12 years to write. With this knowledge gives me the areas of geography, computers, english, history, math, spelling, reading, GRE, GED, and Praxi prep and other basic to graduate level subjects to teach. I am described as motivated, caring, compassionate. This is when working with kids in any field comes down to has have the patience

$ 35.00

average per hour

($20.00-$50.00)

Range

Teaching all levels of math and physics for high schools and college. Tutoring All math for 6 - 12, College, SAT, HSPA, ACT, MCAT(math, Physics), GRE(Math), GED, Chemistry, Engineering Essex County College Newark NJ. New Jersey City University, Jersey City, NJ Newark Public Schools NJ. Private tutor. No student left behind

$ 40.00

average per hour

($30.00-$50.00)

Range

April 2010 – January 2012 February 2009–April 2010 November 2002–February 2009 Volga-Dnepr Technics (Aircraft Maintenance/Repair/Overhaul Company) Moscow, RussiaHead of Production Planning Control Department- Coordinated and supervised the work (in Sheremetyevo and Domodedovo airports in Moscow):· Operational planning of aircraft maintenance process· Preparation of Documentation Package (Work Package) to perform aircraft maintenance· Collection and processing of technical reports after aircraft maintenance was performed· Invoicing and analysis of man-hours for aircraft maintenance· Developed and coordinated annual and monthly maintenance plans· Taught classes in international aircraft maintenance standardsLegrand (French Industrial Group) Ulyanovsk, RussiaChief of assembly plant- Manufacturer of wired device

$ 23.50

average per hour

($15.00-$32.00)

Range

Individualized attention to the whole student's needs brings the best success. Dr. Griffith Garland studied engineering physics as an undergraduate at Embry-Riddle Aeronautical University, pioneering the program by being a member of the first class to graduate with that degree. She was twice a member of Who's Who Among American College and University Students and graduated summa cum laude. She put herself through college by tutoring students, working as a teaching assistant, and becoming the training manager at the University's computer lab. She went on to study geochemistry at Washington University in St. Louis, where she researched hydrothermal systems on Mars and their implications for life. While earning her Ph.D. at Washington University, she realized that some professors had difficulty conveying material to their students. She decided to be different and completed a Master's of

$ 40.00

average per hour

($35.00-$45.00)

Range

During my years at Virginia Tech, I helped numerous friends complete their homework assignments. I gave them insight on how to approach the problem and let them figure out the specifics with minimal help from me. I became comfortable with instructing people and showing them the easiest way to reach a final solution. I started tutoring several of the children in my neighborhood and it grew on me. For me it is very rewarding experience to be making a difference in children and teenagers their lives by transferring the knowledge and skills I have acquired over the years onto them. After I started my now full time IT job I wanted to find a part time position where I can utilize my math skills because I found that there is none required for an entry level IT position. Losing them after I worked countless hours earning a B.S. degree in engineering would be detrimental to the opportunities I w

$ 40.00

average per hour

($30.00-$50.00)

Range

Fimiliarity associated with metallic materials and processes in the Aerospace Industry I have BS and MS degrees metallurgical/materials engineering from the University of Pittsburgh, with 30-plus years experience in the metals industry. My industrial experience spans from primary ferrous and nonferrous metal production to aerospace manufacturing, working in various management capacities ranging from plant metallurgist/quality control to general/sales manager. Industrial background includes foundry/casting, specialty steel production, forging, commercial heat treating, and original equipment manufacturing. I try to fully understand and assess the student’s needs to better resolve issues surrounding the subject matter. I encourage and stimulate student participation through real life experiences, examples, and applications to facilitate the students understanding of the subject matter.

$ 55.00

average per hour

($35.00-$75.00)

Range

I am a degreed (BS and MS) Mechanical Engineer and a PE and am very experienced with Aerospace Engineering related subjects. I have both a BS and MS in Mechanical Engineering with many years of Industry experience. I am well versed in the areas of Heat Transfer, Thermodynamics, Fluid Mechanics, HVAC&R related subjects, Mechanics of Materials, Materials Science and Engineering, almost all Math subjects (Calculus, Geometry, Algebra), Aerodynamics, Compressible Flow, Thermal Analysis, Structural Analysis, Engineering Mechanics - Statics and Dynamics, Machine Design, Computational Fluid Dynamics, and others. I have a very direct and user friendly approach to teaching and tutoring and have a strong grasp of the fundamentals that I like the student to learn and work on so they can solve the problems expected of them in class and on their exams.

$ 40.00

average per hour

($20.00-$60.00)

Range

I have worked in several positions requiring detailed knowledge of applied mathematics (e.g., development of finite difference, finite element computer codes for solving partial differential equations). For example, during 1977-1983)I was a Research Engineer at the University of New Mexico Engineering Research Institute (Theoretic Division and Geodynamics Division) developing mathematical models of wave propagation in geologic materials. I also served as Lecturer (1984-1988) in the University of Texas Aerospace Engineering Department teaching the basic sequence of engineering mechanics courses (statics, rigid body dynamics, introduction to mechanics of solids, structural dynamics). I worked as an environmental engineer at the Texas Commission on Environmental Quality for over 20 years serving as a Technical Consultant for Modeling and Statistical Model while working on developing math

$ 12.50

average per hour

($10.00-$15.00)

Range

solving sample problems ,and home works WORKED AS A FULL TIME STRUCTURAL ENGINEER UNDER A S.E. (REGISTERED STRUCTURAL ENGINEER) IN RESIDENTIAL AND COMMERCIAL PROJECTS SUCH AS HOSPITALS, AIRPORTS, HOTELS, OFFICE BUILDINGS, PARKING STRUCTURES, CONDOMINIUMS, AND CUSTOM HOMES. RESPONSIBILITIES INCLUDE DESIGN AND ANALYSIS OF VARIOUS STRUCTURAL ELEMENTS FOR GRAVITY, SEISMIC AND WIND LOADS USING BOTH LOAD AND RESISTANCE FACTOR DESIGN (LRFD) AND ALLOWABLE STRESS DESIGN (ASD) PER 2007-CBC. PREPARATION OF STRUCTURAL CALCULATION FOR BEAMS, COLUMNS, CONCRETE DECKS, SHEAR WALLS, RIGID FRAMES, RETAINING WALLS, RAISED AND SLAB FOUNDATIONS,mat footing design ,tenant improvement commercial building design and steel storage tank design, SHORING (SOLDIER PILES INCLUDING TIEBACKS & PIPE RAKERS ), AND MISC. STRUCTURAL ELEMENTS ALONG WITH PREPARATION OF CAD STRUCTURAL DRAWINGS FOR FOUNDATION PLAN, FRAMING PLA

$ 71.00

average per hour

($36.00-$106.00)

Range

Currenntly I am a 3D Modeling/Prototyping Consultant with the leading manufacturer of additive manufacting hardware. 5 years experience I specialize in product design using Solidworks, 3D CAD Software. I am an expert in the use of the ProJet Line of 3D modeling systems. I have a strong basic knowledge of STL file fixing software and a working knowledge of various prototype model building techniques for industry. I also understand many manufacturing processes and their procedure requirements. I regularly consult with and train industry leading companies employees for Honda, Addidas, Nokia, John Deere, and Medtronics to name a few on how to better build their prototype models for their unique product applications. I am comfortable teaching one student or a class. I am happy to work as a consultant or a contractor on creating any geometric shape required,

$ 35.00

average per hour

($30.00-$40.00)

Range

I have worked to assist my fellow students throughout my undergraduate career. As a graduate of the U of I, I have had courses in physics, math up to and including differential equations, basic chemistry, and a significant number of fluids/propulsion courses. In addition, I have an understanding of CAD design, thermodynamics, and nuclear processes. I have recently had courses in plasma generation and dynamics, statistics, finite elements, and rocket propulsion. During my high school tenure, I graduated as the valedictorian while taking a mostly self-study program during my senior year. I participated in WYSE (Worldwide Youth in Science and Engineering), an academic challenge supported by the University of Illinois all four years of high school. Each year I advanced to the state level competition, placing once in Chemistry and once in Physics. My preferred teaching style is to tak

$ 32.50

average per hour

($25.00-$40.00)

Range

My teaching style depends on the student, it is adaptable. Some people are more visual, others are more lecture type, it all depends on the person. Experience tutoring MS, PhD, post-doctoral, or resident-interns in the medical field. I also have tutored established PE type engineers and MBAs for executive type presentations. Have tutored high school and undergrad as well. The teaching style is adaptable, but I prefer tutor either in a university library, coffee house, or classroom environment.

$ 42.50

average per hour

($30.00-$55.00)

Range

I have 5 years of experience as a substitute teacher at Hazelwood School District. Over 10 years administrative experience typing and customer service skills, finance experience in auditing, financial analysis, budgeting, forecasting, problem solving experience in various corporate environments. Have been a substitute teacher for Hazelwood School District for five years. Specialize in elementary school grades 1-5. Teach reading and writing for elementary students. Teach business education classes for high school students as well as job preparation skills. I enjoy teaching and working with children and young adults. I have the ability to teach in all grade levels so all children can understand. I believe in giving back to the community by helping all children reach their potential in education.

$ 46.00

average per hour

($51.00-$55.00)

Range

I am a 2001 graduate of Churchman's Business School where I earned an Associates Degree in Accounting and Finance; In 2003 I graduated from Alvernia College where i earned A Bachelor of Business Degree; I have also finished 12 of the 36 credits needed to obtain an MBA in Corporate Finance at Alvernia College. I have over ten years of Accounting experience, and currently hold the position of President at a small electronics manufacturing company. I feel that everyone has the ability to learn if they are given the proper tools and direction to succeed. I have learned from my instructors what has motivated me to do the very best that I could.In the workforce I have used the skills to successfully provide support services to our customers as well as our corporate management team.

$ 37.00

average per hour

($42.00-$46.00)

Range